Shielding gas sinter furnace for Ceramill Sintron with shielding gas flood chamber
_Consistently high sintering quality thanks to optimum coordination with the IDC CAD/CAM system
_Maximum process reliability due to integrated compressed air and shielding gas monitoring
_Minimum shielding gas consumption
High-temperature furnace for the final sintering
of dental oxide ceramics, particularly for zirconium oxide blanks.
The sintering furnace is pre-programmed by the
manufacturer with 3 temperature programs,
which are matched to the zirconium oxide frame
material of Amann Girrbach AG.
247 further programming positions are freely programmable.
The stackable sintering bowl, filled with sintering
pearls, is used for sintering the zirconium oxide
frames. Any other or further-going use, such as
the processing of other products than those
intended for, as well as the handling of hazardous
substances or materials hazardous to one's
health, does not apply as under the intended use.
As to the materials being used in the furnace, it
must be known whether they are aggressive to or
even could lead to destruction of the insulation or
of the heating rods.It is prohibited to remove safety devices, bypass
them or put them out of operation.
Unauthorised modifications/alterations of the
machine shall void the warrantyThe set-up instructions and the safety regulations
must be followed, as otherwise the furnace is considered as not being used as intended for, and any
and all claims against the manufacturer shall
become void.This product was designed and manufactured
based on careful selection of the harmonised
standards to be observed, as well as additional