Automatic humidifier MG 3000 is designed to humidify and heat the respiratory mixture delivered to a patient during positive airway pressure respiratory support though an endotracheal tube, nasal cannulas or a face mask with availability of constant flow.
Heating and humidifying of gas is provided by the flow passing above the surface of the heated water, the constant temperature in the breathing circuit tubes is maintained by one or two heating elements located in it.
Automatic humidifier MG 3000 has the following features:
temperature in the circuit is controlled by two probes located at the output of a humidifier chamber and at the breathing circuit proximal end level (at the endotracheal tube)
two-point temperature control function ensures that the respiratory mixture delivered to the patient has appropriate level of heating
temperature level of the respiratory mixture by using Y-type connector can be set automatically
by using the button on the front panel, it can be possible to select the option of respiratory support (invasive or non-invasive)
temperature of the respiratory mixture is displayed on the LED display
Main characteristics:
Using breathing circuit of different manufactories
Using non-heated breathing circuit
Using heated breathing circuit
Displaying all possible temperature parameters in the view mode
Setting a constant displaying one of the temperature parameters
Automatic and manual keyboard lock
Alarm temporary switch off (2 minutes)
Emergency protection of the heating plate from overheating
Invasive / non-invasive ventilation mode
Temperature control in «heated breathing circuit mode» (invasive mode)