Cremation incinerator MAX80

mortuaryfloor-standing1-door

High-efficiency engineering for higher volume. The MAX80 is the Matthews Environmental Solutions cremation system built for your whole schedule, in one building or across several. It handles 8 cases a day and decedents up to 1,000 lb (454 kg), with a 43 in (109 cm) door, a 104 cu ft (2.9 m³) secondary chamber, additional combustion air, and front or rear cleanout to fit your floor plan. It runs the same MPYRE® interface as every Pro and Max Series machine: same four steps, same modes, same schedule tool. Train an operator once and they can work any unit in any building. Set the week's schedule in advance. MPYRE® uses 50% less gas per case than our previous technologies, measured across over 300 actual cremations, February to May 2026. Available in Alpine or Graphite. Built to run for decades. Product Highlights Maximum-production design engineered for demanding, high-volume schedules Cycle time is 75-minutes or less, depending on case, container and conditions 43-inch wide chamber accommodates cases up to 750 lbs MPYRE®3 control system for unrivaled simplicity and fuel savings up to 50% Optional rear clean-out for polished family-friendly appearance Technical Specifications Height 9' 6.25"/2.9 m Width 7' 7"/2.31 m Length 12' 0"/3.66 m Weight 33,000 lb/14,969 kg Fuel Natural or L.P. Gas (Oil Available) Electrical 230 Volts, 1-phase/3-phase