video corpo

medical gas flow meter / in-line

Add to MyMedicalExpo favorites
Compare this product
medical gas flow meter / in-line medical gas flow meter / in-line - DFB


  • Fluid type:

    medical gas

  • Other characteristics:


  • Output:

    Min.: 0 l/min (0 us gal/min)

    Max.: 30 l/min (8 us gal/min)


DFB = Designed For Blenders

1.5″ DISS 90 elbow adapter included

The Maxtec “DFB” flow meters are specifically designed to work with blenders, which until now, is unheard of in the industry. These DFB flow meters are calibrated for the pressure drop that is associated with a blender as flow rates are increased. This is especially important in the world of high flow.

Every Maxtec DFB flow meter has a dual-scale, which essentially combines 2 flow ranges into 1 flow meter. Our Dual Taper allows accuracy from the lowest visible ranges, to higher flows. This eliminates the need for multiple flow meters attached to a blender, which means your blender setup will take less real estate, leaving room for more equipment.
Maxtec DFB flow meters are designed and calibrated to provide increased
accuracy compared to standard flow meters, when used on air/oxygen
blender outlets. By utilizing dual-scale graduations, the flow meters
provide two flow meters in one for increased accuracy at lower flows.
The flow meters feature high-quality acrylic block bodies and precision
valves. Each flow meter comes equipped with a DISS outlet and DISS
adapter for neat and compact attachment to the side of the blender.
1.2 Intended use
The flow meter is intended for use as a secondary flow meter for an
air/oxygen blender, such as the Maxtec MaxBlend 2, and is to be used
by physicians, respiratory therapists and other authorized hospital
personnel to administer selected doses of medical gases to a patient.
• Use flow meters only for their “Intended Use” as described in this manual.
• ALWAYS confirm prescribed flow before administering to patient and
monitor flow on a frequent basis.