CO2 laboratory incubator / O2 / for IVF / benchtop

Add to MyMedicalExpo favorites
Compare this product
CO2 laboratory incubator / O2 / for IVF / benchtop CO2 laboratory incubator / O2 / for IVF / benchtop - ICO105med


  • Type:

    CO2, O2

  • Applications:

    for IVF

  • Configuration:


  • Temperature range:

    Max.: 50 °C (122 °F)

    Min.: 18 °C (64.4 °F)

  • Capacity:

    107 l (28.3 gal)


Ideally suited for in vitro fertilisation. Controlled CO2 and O2 concentration as well as gentle cultivation in Petri dishes in separate slide-in units.

IVF module for ICO105med
Standard delivery IVF module for ICOmed
On this page, you can find all the essential technical data on the Memmert CO2 incubator ICOmed with IVF module. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at

Working-temperature range 5 °C above ambient temperature up to +50 °C
Standard sterilisation programme: 60 minutes at 180°C (without removing the sensors)
Setting temperature range +18 to +50 °C
Setting accuracy temperature 0.1 °C
Temperature sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Temperature variation in chamber at + 37 °C (to DIN 12880:2007-05) +/- 0.3 K
Temperature fluctuations with time at 37 °C (to DIN 12880:2007-05) +/- 0.1 K

Standard equipment
Standard accessories Membrane filter (in order to remove impurities and pollutants, all incoming gases pass through a membrane filter before they reach the chamber)
IVF-module patented, consisting of 8 slide-in units, a total of 16 special racks with indentations for 16 Petri dishes (60 mm diam.) resp. 32 Petri dishes (35 mm diam.), 2 racks with indentations for 3 special media tubes each; racks with indentations for 4-well dishes on demand;

Other Memmert GmbH + Co. KG products