Torque wrench Bar type

torque wrench
torque wrench
Add to favorites
Compare this product
 

Characteristics

Type
torque

Description

Convertible Abutment Indication - Single/bridge/full arch restorations - All position - Bridge case with a wrong path - Framework for bar overdenture - Screw/Combi retained restoration Feature & benefit - Path compensation up to 60°. (based on two fixtures) - Advanced convenience from four prosthesis options, Combi/Angled/Gold/Plastic. - Abutment connection using carrier - Margin esthetic effect from gold coloring. 䤎Application of tightening torque ① Check the direction to apply the torque. : “Arrow IN” means fastening direction and “Arrow OUT” means loosening direction. ② Connect the driver with torque wrench wheel (A). ③ Insert the driver connected with torque wrench at the material. ④ Anchor “A” with a finger and pull “C” in order to apply the intended torque. As shown in Fig. 2, make the arrow of intended torque match with the center line of the bar in order to apply the intended torque accurately. Note) Tightening torque is different depending upon the kind of prosthesis and screw. In Fig. 2, the last line under the torque means the maximum torque and means about 40Ncm. Application of limitless torque ① Follow the tightening torque application processes, ① through ③ ② Anchor “A” with a finger and apply the torque using “C

Catalogs

No catalogs are available for this product.

See all of Osstem Implant‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.