Locker lock GN 1150

locker lock
locker lock
locker lock
Add to favorites
Compare this product
 

Characteristics

Applications
for lockers

Description

Stainless steel latches GN 1150 are intended for use in hygienic areas and meet hygiene requirements on the operating side (front hygiene). The locking mechanism is protected by two seals. At the same time, the high surface quality (Ra < 0.8 µm) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning. The latches create a secure closure by rotating a maximum of 90°, which positions the latch arm in the locked position behind the frame. Slanted surfaces on the latch arm ensure smooth positioning. Latch arms are available with different bend angles to cover a latch arm distance A from 6 to 28 mm. The mounting holes in the housing must be at a right angle, free of burrs and without a chamfer. This ensures that the sealing rings will function properly. Stainless steel latches GN 1150 are supplied with loosely enclosed latch arm. Lock housing Stainless steel AISI 316L Latch arm Stainless steel AISI 304 for d1 = 22 AISI 316L for d1 = 30 Sealing ring / O-ring EPDME Blue, FDA-compliant Temperature resistant -40 °C to +120 °C Hardness 85 ±5 Shore A (Sealing ring) Hardness 70 ±5 Shore A (O-ring) Other parts Stainless steel AISI 316L All moving parts lubricated with FDA compliant special grease

Other Otto Ganter products

Product Family Hygienic Design

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.