The “C” 4 parameters tester is a new generation of automatic tablet testing system for integrated in process control (IPC). Intended for use as a stand alone equipment with its own HMI or in combination with an upward conveying tablet deduster, the module offers premium analysis capabilities in testing tablets weight, thickness, hardness and length/diameter.
Extremely quiet testing environment with no air turbulence - Very accurate measurement
Complete separation between product and mechanical/electrical area to increase operator safety
Tablets transfer by vacuum allowing less dust contamination in the tester area
CFR 21 Part 11 compliant software
Easy cleaning, validation and calibration
At the heart of the unit design is the strict separation of dust or tablet fragments from the production flow, resulting in continuous manufacturing process. Tablets are sampled directly on the press and conveyed through a flexible hose to the tester via vacuum. The pinch valve placed at the input of the equipment, the optional H13 Hepa Filter and the light negative pressure are all elements which avoid environmental contamination and ensure increased safety for operators. The entire test area is equipped with sealings. Sample tablets are tested for each parameter against pre-programmed recipes. The hardness broken ones are rejected in a Clip & Cut bag, while the non-destructed go in separated Clip& Cut bag as witness. An utmost care has been taken to simplify the design for cleaning procedures.