Dental instrument disinfectant dentavon®ID

for medical devicespowderhydrogen peroxide-based

Product description
Aldehyde-free disinfectant based on active oxygen for the disinfection of dental impressions by complete immersion (silicone, polyether, alginate). Designed for professional use in dental practices and laboratories.

Our Plus

• Good material compatibility with common impression materials
• Broad spectrum of efficacy: bactericidal, yeasticidal and virucidal (see EN standards)
• Based on active oxygen — avoids aldehyde exposure
• Immersion method produces no aerosols and ensures all impression surfaces are contacted

Fields of application
For full-immersion disinfection of dental impressions made of silicone, polyether and alginate. Recommended to be applied in the dental practice before shipment to the dental laboratory; laboratory should re-disinfect if disinfection status is uncertain.

Instructions for use
Prepare working solution immediately before use. The prepared solution remains microbiologically stable for up to 8 h at 25 °C. Change the solution if visibly contaminated. Rinse impressions under running water before and after immersion. Wear appropriate gloves during handling.

Dosage instructions and information for use
Rinse impressions under running water. Fill container with water (max. 30 °C), add the required amount of product and dissolve. Weigh the powder according to the dosing table. Immerse impressions, respect the recommended contact time, then rinse again under running water.

Microbiological efficacy (recommended use concentration)*
Bacteria, yeasts and mycobacteria
bactericidal — Test method: EN 13727; EN 14561 (clean conditions) — Contact time: 5 min / 20 °C
yeasticidal — Test method: EN 13624; EN 14562 (clean conditions) — Contact time: 5 min / 20 °C

Viruses
virucidal activity — Test method: EN 14476; EN 17111 (clean conditions) — Contact time: 5 min / 20 °C

*including phase 2 step 1 and phase 2 step 2 tests. 1% = 10 g/l

Composition
100 g contain: 49.5 g pentapotassium bis(peroxymonosulphate) bis(sulphate). Contains: sodium (1-hydroxyethylidene) bisphosphonate, sodium dodecyl sulphate, (+)-tartaric acid.

Special advice
Use disinfectants safely. Always read the label and product information before use. Ensure specified concentration and contact time in the immersion bath. Wear gloves. Working solution may bleach sensitive textiles. Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container. Dispose of empty packaging according to local regulations. Leftover product may be disposed with household waste where permitted. Ensure adequate ventilation. For professional use only.

Technical data / Order information

• Brand: schülke
• Commercial name / model: dentavon®ID
• Short description: aldehyde-free active-oxygen disinfectant for immersion disinfection of dental impressions
• Active system stability: working solution stable for 8 h at 25 °C
• Recommended use concentration: 1% = 10 g/l
• Microbiological contact time: 5 min at 20 °C (bactericidal, yeasticidal, virucidal as per listed EN standards)
• Composition (per 100 g): 49.5 g pentapotassium bis(peroxymonosulphate) bis(sulphate); contains sodium (1-hydroxyethylidene) bisphosphonate, sodium dodecyl sulphate, (+)-tartaric acid
• Product packaging: dentavon ID 900 g DS — Delivery form: 4 / carton(s)
• Item no.: 70003653
• GTIN / EAN: 4032651985166
• Certification: CE (notified body number shown on product info)
• Intended use: disinfection of dental impressions (silicone, polyether, alginate) by submersion
• Safety / handling: gloves required; may bleach sensitive textiles; protect from frost, heat and sunlight; store at room temperature