The Silbermann's Area & Main Alarm Panel displays your local & central supply Medical Gas information on a highly visible panel.
Silbermann's Main Alarm System monitors the central supply sources to the entire hospital.
Malfunctions originating at the manifolds, the air compressors, vacuum pumps or any other
connected source are displayed on the panel in the form of red lights and alarm sounds.
At local warning facilities, line pressure alarm panels may be installed in nurses stations, operating theaters, delivery rooms and in other critical care areas. Area line pressure alarm panels are modular assemblies and the tranducers can be mounted locally or remotely . The operation of all modules is controlled by advance electronics.
These advance digital alarm panels comply with the requirements of the NFPA99; EN7396-1 and G-01.
■ Adjustable repeat alarm (15 or 30 minutes, or
OFF. Also 15 seconds for convenient
■ Alarm buzzer level adjustable: 70, 80, 90 dB.
■ Dry contacts for remote monitoring of High and
Low gas pressure Alarm Conditions.
■ Hinged panel opening for easy installation and
■ Area Alarms and Main Alarms can be combined,
up to 5 services plus two main alarm board as
■ Built-in relay for remote annunciator
■ Gas Area Alarm indication for calibration
(lashing bar graph).
■ CAN BUS Communication protocol for fast,
safe and reliable data transfer between all the
XANADU system boards.
■ Optimal Relays Interface Card for adding dry
contacts to a Main Alarm Board
■ Optimal Communications Card (RS 485) for
remote monitoring of the XANADU system, by
Silbermann Info Management System or