cable-electrode connection ensures high mechanical strength during use.
The reusable 10mm diameter cup electrodes are made of thick fine silver band to avoid bending. Thanks the electrode shape the bowl can contain more gel for long term recording. The large base permits to use the electrodes also with double adhesive rings. Electrode and wire are moulded and with no risk of oxidation due to gel or water that penetrates the standard shrink tube.
Ideal cable-electrode connection to avoid water contact and to ensure high mechanical strength.
Autoclavable electrode (available in non-autoclavable version on request).
Extremely flexible silicone cable.
The 10 mm diameter casted cup electrodes are made with a special technique which gives the electrodes a good thickness which allows them not to bend. A hole is borrowed in the shaft to insert the wire. A heat shrinking tube covers the shaft and the wire. In such way the gel and the water used during the cleaning operation do not enter in contact with the cable and the corrosion is not usual. The product is totally autoclavable with no tangle silicon lead wire.
Consists of a sintered disk moulded in an insulating material.
Excellent signal quality guaranteed by the low impedance of the material.
Made to ensure long-lasting recordings.
Spes sintered electrodes are made using the best quality sintered discs encapsulated in a collodion and acetone resistant encasement. The electrode surface is located at a few mm from the base and the contact between the skin and the sintered disc is obtained only through the conductive gel. The contact is more stable because the gel works as a shoc