Calibration water bath 830-P1

circulating waterheatingstirring

Equipment : Circulating Water Bath Accuracy : ±0.1°C. Safety feature : Built-in circuit breaker • PID controller with auto-tuning to ensure rapid heating, minimum temperature fluctuation and overshoot. • Push-button operation and LED screen display digitally both the set and actual temperatures to ±0.1°C and can be locked. • Auto diagnostic system integrated in the controller ensures rapid identification and correction in the event of any error. • Off-set function for calibration use. Important for ISO/Calibration requirement. • Back-up system memory protects the set point value in case of power failure. • Detachable controller – can be used on any suitable size containers. • With built-in circuit breaker to ensure safe and lasting operation. • Stirring motor ensures temperature uniformity throughout the bath. • Manufactured by a factory certified to ISO 9001:2015 • Type tested to MS IEC 61010-1:2006 Standard Electrical Safety Test. Bath material - Perspex - - - - - - - - Temp. working range - 5°C above ambient temperature to 65°C - - - - - - - - Temp. control range - 0°C to 100°C. Below ambient with external cooler - - - - - - - - Controller - PID controller - - - - - - - - Setting and display - Digital, read out to 0.1°C - - - - - - - - Accuracy - ±0.1°C - - - - - - - - Sensor - PT-100 - - - - - - - - Safety device - Complete with circuit breaker as standard - - - - - - - - Heater - 960 watt - - - - - - - - Stirring - By means of built-in circulating pump - - - - - - - - Bath capacity - 10 litres - - - - - - - - Bath dimensions (mm) - 128W x 455D x 195H - - - - - - - - Working area (mm) - 128W x 225D x 195H - - - - - - - - Overall dimensions (tank only) (mm) - 145W x 470D x 225H - - - - - - - - Weight - 6.3 kg - - - - - - - - Power source - 240 VAC, 50Hz, 4A