Desiccant dehumidifier TTR 400 D
airfor the pharmaceutical industrymobile

desiccant dehumidifier
desiccant dehumidifier
desiccant dehumidifier
desiccant dehumidifier
desiccant dehumidifier
desiccant dehumidifier
Add to favorites
Compare this product


Operational mode
for the pharmaceutical industry, air
Other characteristics


The mobile dehumidifier TTR 400 D: Maximum performance and double flexibility thanks to Duoventic The TTR 400 D desiccant dehumidifier not only impresses with its very good dehumidification performance even at low dew points well below 0 °C but also with maximum versatility due to the TTR Trisorp Dual principle of operation: Two separate air flows for dry and regeneration air with two separate fans for each circuit allow an efficient pressure-tolerant recirculation when setting up the dehumidifier outside as well as inside the room to be treated. Variable circulating air drying with the TTR 400 D ensures power-saving dehumidification at an increased drying rate: Compared to the "outdoor air" supplying the regeneration air, in contrast to conventional through-air operation, up to 30 °C lower dew point temperatures can be achieved with the TTR 400 D for a nominal dry air volume. Therefore, dew points far below 0 °C can be achieved, which results in considerably lower drying stages and in considerably more energy-efficient operation! Double flexibility thanks to Duoventic All TTR-D models are also equipped with the advanced Duoventic air volume regulation which allows independent, infinite, electronic control of both fans of the separate air circuits. Duoventic therefore allows you to separately fine-adjust moisture content and volume flow of the required dry air without the need to install energy-wasting throttle valves, for example, as it had often been necessary in the past.


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.