Medical device manufacturing tubing VENABIO® Double Braided

medical device manufacturing tubing
medical device manufacturing tubing
Add to favorites
Compare this product


for medical device manufacturing
silicone, polyester
transparent, multilayer

Min.: 25'00" (7.6 m)

Max.: 50'00" (15.2 m)

External diameter

Min.: 13.1 mm (0.5 in)

Max.: 46.1 mm (1.8 in)

Inner diameter

Min.: 5.1 mm (0.2 in)

Max.: 31.8 mm (1.3 in)


Platinum-cured silicone tubing Platinum-cured silicone tubing high pressure resistant.Silicone tubing is the basic material upon any single use process is built. Its great overall performance and resistance to temperature, moist, ozone and steam and high biocompatibility make it the product of choice for all stages of bioprocessing, from drug formulation, upstream processing and all downstream’s critical steps from separation to final fill. This product is braided twice using a polyester yarn and a silicone layer between them. This provides high pressure resistance and a maximum of 180˚C. Hardness 60 Shore A check Tensile strength >7 N/mm² Outer Layer Platinum cured silicone. Postcured to completely eliminate volatiles reinforcement Reinforcement Reinforced with a double polyester braiding temperature Temperature -60˚C / +180˚C (-76˚F / +356˚F) roll_length Roll Length Available in 25ft and 50ft laser_etched Laser Etched Traceable with reference, lot number and ID/OD clean_room Clean Room Manufactured in ISO14644-1 Class 7 double_bag Double Bag Double bagged under vacuum smoothness Smoothness Reduces protein binding and biofilm formation animal_free Animal Free Animal derived component free radiostable Radiostable Gamma/eBeam sterilization available check Elongation >300% check Tear strength >20 kN/m check Density 1,17 g/cm


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.