Pelvic floor stimulator Continence
hand-heldNMES2-channel

pelvic floor stimulator
pelvic floor stimulator
pelvic floor stimulator
pelvic floor stimulator
pelvic floor stimulator
pelvic floor stimulator
pelvic floor stimulator
Add to favorites
Compare this product
 

Characteristics

Type
pelvic electric stimulator
Ergonomics
hand-held
Type of electrical stimulation
NMES
Number of channels
2-channel
Weight

0.07 kg
(0.15 lb)

Length

119.2 mm
(4.7 in)

Height

28.7 mm
(1.1 in)

Description

Digital Dual Channel Stimulator (NMES)used to treat urinary incontinence by sending a mild electric current to nerves in the lower back, tibialis nerve or in most of the cases, to the pelvic muscles using a probe. Suitable for urinary or rectal incontinence. 9 Built in programmes for ease of use. 3 Customisable constant mode programmes. Ability to lock the unit and records total time in use and average current. Clear bright backlight LCD allows the display to be read more easily in low light or dark conditions. Keypad with bigger buttons for ease of use. Compact, light and reliable. STIM Dual channel: individually isolated circuits. Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA. Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.. Selectable pulse width: 50 μS – 450 μS [2% accuracy]. Pulse Rate selection: in the continuous mode 2 – 100 Hz [2% accuracy]. Time duration of the treatment selectable: 1 minute to 90 minutes. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero. Ramp up time 0.3 – 9.9 seconds.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.