4-compartment veterinary cage 80381
stainless steelpolypropylene

4-compartment veterinary cage
4-compartment veterinary cage
4-compartment veterinary cage
4-compartment veterinary cage
4-compartment veterinary cage
Add to favorites
Compare this product


stainless steel, polypropylene


80381 Four-cage polypropylene module 1500x500x1400h Module 80381 consists of two rows of cells, high at the bottom and smaller at the top. At the top row is one of the cells with an oxygenation door. At the bottom row, there is a removable partition between the large cells. If necessary, the partition can be removed and the two cells will be combined into one big one. The walls of the cells are made of thick plastic (10 mm), resistant to all chemicals. The facade (doors) is made of stainless steel. The module is mounted on a stainless steel support frame, to which the wheels are in turn attached. Dimensions of the module 80381 without wheels and partition: width 1500 mm, depth 500 mm, height 1400 mm. Lower row of cells 800 mm high, upper row 600 mm high. Cell depths are the same at the top and bottom. The floor in the cells is flat, without additional pallets. Doors are fixed on stainless steel spring-loaded latches.



No catalogs are available for this product.

See all of Vetbot‘s catalogs

Other Vetbot products

Veterinary hospital equipment

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.