Laboratory hood is the main tool to protect respiratory passages of laboratory technicians. These hoods should be used when working with hazardous substances in chemical laboratories.
Laboratory hoods are made of steel sheet and steel profile, and coated with chemically resistant powder paint based on epoxy resins.
In order to increase the safety of experiments, a triplex is used as a protective shield.
Modular universal laboratory hood is all-metal box with a vertical screen and metal side walls. The screen is a triplex located in aluminium frames, with a system of counterweights. Counterweights are located on the back of the hood. Screen lifting height is 800 mm. The exhaust chamber is made of cold-rolled metal sheet painted with epoxy resin powder paint. Air exhaust is made in the chamber consisting of two zones (light and heavy gases). At the bottom of laboratory hood there is a dismountable reinforced frame from a profile pipe of rectangular section 60x30 mm. The hood is equipped with 200 mm diameter flange for connection to exhaust system. Height with raised screen is 2,500 mm.
Junction box for power supply to the hood, it is located on the back of the exhaust hood.
LED lamp placed in a dust and moisture resistant housing, it complies with ingress protection class of IP65. It is located in the upper part of the exhaust hood (regardless of aggressive media); it lights the working surface of the chamber.
Two circuit breakers.
Two drop-proof sockets with grounding.
LED lamp switch.