Wheelchair lifting platform S11

This solution can be installed: in a private home (to make the rooms of the house more accessible or to facilitate the mobility of people with disabilities in wheelchairs), thus improving the comfort of the home itself in a condominium (one classic situation in the UK/Germany is the presence of three or four steps in front of the condominium’s ground floor entrance, which can be easily resolved with a platform lift) in a shop/office building/restaurant, in order to overcome small height gaps. Platform lift measurements, encumbrances, and energy consumption values; is also known as a vertical platform for the disabled, a lift, and an open shaft lift. Installation The system can be installed both indoors and outdoors, in three different configurations: Free-standing Masonry shaft Shaft with steel protection Load capacity: up to 400 Kg Distance: 2 stops/ 2.99 m Drive mechanism: with electric motor and worm screw Speed: 0.05 m/sec (Versions 1.100, 1.600, 2.100) 0.10 m/sec (Versions 2.600, 2.990) Motor and power supply: Motor positioned inside the shaft, with the following specifications: Power rating: 2.2 Kw ; single phase for versions 1.100, 1.600, 2.100 and three-phase for versions 2.600 and 2.990; Line voltage: 230V ± 5%, AC – 50Hz single phase; Auxiliary power supply voltage: 24V DC; Power supply Motor with inverter (optional for versions 1.100, 1.600, 2.100) Attachments To be chosen by the customer: pre-walled anchoring brackets, or alternatively rear-wall mounted with mechanical anchors rear-wall mounted with chemical or hollow wall anchors with metallic support structure/protection Guide rails Made from processed T70-1A section.