Capillary viscometer AVS® 370

laboratory

The AVS® 370 polymer set, besides of the control system , includes all accessories for a complete measuring system, incl. waste system: After measurement, the sample is pumped from the viscometer into a waste bottle – the viscometer is rinsed without the need of removing the viscometer when changing the sample. The filling and the waste system make the handling of the samples simpler and safer. Therefore the polymer set is recommended for all applications with hazardous samples, e.g. in polymer analytic. Available for 1, 2 or more measuring positions. Scope of delivery: •AVS®370Basic unit for optical detection •VZ 8561ViscoPump II for optical detection •CT 72/2 Transparent thermostat bath •CK 310 Flow through cooler •AVS®/SKMeasuring stand, made of PVDF •VZ 8571Instrument support for AVS®370 •VZ 8523PTFE-hose-set for “suction” mode •VZ 8601Valve block for discharge system •VZ 8610 PTFE tube to connect vacuum pump •VZ 8630Vaccum pump for waste system •VZ 8604Sample filling set •VZ 8606Waste basic set •VZ 8551Safety device for waste bottle (fill check) •VZ 8552Safety device for safety bottle (capacitive sensor) The AVS® 370 is a PC controlled viscosity measuring device for capillary viscometers. The article contains the basic system incl. software WinVisco, equipped with one ViscoPump III for one measuring position, a measuring stand AVS®/SK, a thermostat bath CT 72/2, and a cooler CK 310. But no viscometer. The AVS® 370 can be upgraded with max. 8 ViscoPumps for parallel use of multiple measuring positions