Water analysis test strip SA0300

for fishnitritepH

This product can be used for the detection of nitrate (nitrate+nitrite), nitrite, residual chlorine, total hardness, carbonate, and pH in aquariums, aquaculture water, or other water quality (drinking water and its source, well water, surface water, swimming pool water, hot spring water, mineral water, sewage, etc.). Precautions: 1 Kead e nctosed directions carefulty 2 Keep away from light & moisture. 3 Do not remove desiccants. 4 Replace ca p im mediately & tlghtty after ta king out strips. Test Method: 1. Immerse the test strip in the water sample to be tested for 1-2 seconds and remove it. 2. Use absorbent paper to remove excess water from the test strip. 3. Place the test strip reagent block horizontally and compare it with the color chart, and record the results. Note: Please read the results according to the time given on the color chart.