Eitan infusion pumps

Infusion rate: 0.001 l/h - 0.01 l/h

... antibiotics, analgesuic, chemoterapeutic agent an other medications or fluids requiring countinuous delivery at controlled infusion rates. The silicon medical grade baloon assure the highest of non inter-action with most ...

Infusion rate: 0 l/h - 1.5 l/h
Weight: 1.8 kg

... sophisticated motor and dual detectors to guarantee infusion precision and stability. Intelligent pulse compensation technology and heating technology ensured the consistency of the long-time infusion ...

... Programmable & Refillable Micro Infusion PumpThe iPRECIO® micro infusion pump uses a patented, microprocessor controlled peristalsis mechanism for accurate controlled flow. It is the ...

Bolus rate (dose): 0 l/h - 2 l/h
KVO/TKO flow rate: 0 l/h - 0.005 l/h
Weight: 2 kg

X-Infusion is a electronic medical device that delivers fluids, such as nutrients and medications, into a patient's body in controlled amounts. The device is equipped with a GUI with a touchscreen display. The device ...

SN-1500H infusion pump is an infusion pump with very unique horizontal design,which is you are hardly to find in other pumps. This design effectively ...

This implantable infusion pump uses a patented, microprocessor controlled peristalsis mechanism for accurate controlled flow. It is the only implantable and programmable pump for mice ...

Infusion rate: 0.003 l/h - 1 l/h

... and easily re-primes without disconnecting from the patient. Precise Control of Fluid Delivery A high-speed peristaltic pump enables accuracy in fluid delivery, with flow rates ranging from 2.5 to 1,000 ml/min. Intuitive, ...

Infusion rate: 0.001 l/h - 1 l/h
KVO/TKO flow rate: 0.0001 l/h - 0.005 l/h
Weight: 3.4 kg

... accumulated over the last 15 minutes of infusion Drop detector:optical, with digital disturbance filtration Extended system of alarms and warnings (both audible and visual): - Alarms: occlusion, end of infusion, ...

Ambulatory infusion pumps with CADD®-Solis System are safe, simple, smart and reliable options for your ambulatory infusion needs. The multitherapy ambulatory infusion ...

... install or remove pumps thanks to the rotatable pole clamp. Detachable pump body for easy cleaning. the battery life is long-lasting enough to last up to 5 hours. High sensitive sensor and anti-free ...

Infusion rate: 0 l/h - 0.99 l/h
Weight: 350 g
Length: 140 mm

IV Exprés is one of the smallest and easiest to use infusion pump available on the market for intravenous injections. Key facts Class IIb Class IIb medical device with Class C embedded software Licensed ...

... professionals while prioritizing patient comfort and safety. Key features of our infusion pump include: Accuracy and Precision: O-fusion utilizes the latest advancements in infusion ...

Infusion rate: 0.001 l/h - 1.1 l/h
KVO/TKO flow rate: 0.004 l/h
Weight: 2.5 kg

Easy to setup and operate Audio visual alarms Highly pricise Inbuilt battery backup Built-in thermostat Compatible with IV sets of any standerd Injection modes: Flow rate, time-based, body weight

Weight: 2 kg
Length: 197 mm
Width: 145 mm

... Sets • Residual infusion time can be displayed during infusing • Alarm for occlusion, air bubble, door open and motor failure, etc. • Adjustable flow rate mode • A.B.S-ANTI BOLUS system • Alarm volume can be adjusted • ...

Infusion rate: 0 l/h - 1 l/h
Bolus rate (dose): 0 l/h - 1.2 l/h
KVO/TKO flow rate: 0.0001 l/h - 0.003 l/h

The volumetric infusion pump Phoenix VIP+ is a high technology and top/high quality device. It has been developed to be used in standard applications requiring the highest degree of accuracy, as well ...

The iV-GO® solution represents one of the most significant innovations in IV treatment since its wide-spread adoption in the early twentieth century (1902). Unlike many traditional IV solutions, the iV-GO® device is portable, lightweight, ...

... computing performance, meets simultaneous infusion of multiple drugs. Audible and visual alarm system, ensures patient safety. 7″ LCD, real-time display the infusion/alarm information of multiple ...

Unit packaging: Rigid blister and peel-away medical paper Packaging: 80 pieces (8 x 10) for 60 and 100 ml - 60 pieces (6 x 10) for 150, 200 and 275 ml Box: 52x52x43 cm

... TFT-LCD & Jog Dial Docking Station System and CMS IV Set/Syringe Library, Drug Library Relay Mode, Secondary Infusion Mode Close Infusion System(Optional) Blood Transfusion

Infusion rate: 0.001 l/h - 0.01 l/h

... Compared to other elastomeric pumps in the market, the unique donut shape design allows the pump to lie stable on a table, making it easy for pharmacists to prepare. This is a unique feature that is not ...

Infusion rate: 0 l/h - 0.25 l/h
Weight: 3.3 kg - 3.8 kg
Length: 365 mm

... the white Robert clamp. Hold the infusion line filter so that the direction of the arrowis facing up. The diluent solution will flowthrough the infusion line. Observe a drop of liquid at the ...

 Elegant horizontal structure, effectively prevent liquid penetration into the pump.  Smart pulsation compensation, the actual flow rate is more uniform.  Top quality driving motor, less vibration, lower noise.  ...

Infusion rate: 0 l/h - 1.2 l/h
Bolus rate (dose): 0.6 l/h
KVO/TKO flow rate: 0.001 l/h

... automatic bolus Speed that can run in 6 different smarter modes; time, patient records; Drug Library Programmable sequential infusion, ability to reduce or increase the speed when running pigyback More useful: ...

Infusion rate: 0 l/h - 0.25 l/h

Neofuser is a single-use, portable infusion pump for patients that works without batteries or electricity. It provides liquid medication at accurate continuous pre-fixed flow. Neofuser is intended ...

... Very short time to start infusion • Exceptional continuity of infusion • Advanced and easy to use Drug Library • Various infusion modes and units choice • Several protection ...