Fluke healthcare facility detectors

The 875 High Range Containment Monitor consists of a detector, readout, and cable (in metallic tubing) connected through a sealed penetration in the containment wall. The detector walls are thick enough ...

... monitoring system capable of operating over the ranges of 10-2 to 103 mR/h, 10-1 to 104 mR/h, or 100 to 105 mR/h, depending on the detector selected. The system monitors gamma radiation over a 5-decade range and provides ...

... rads if preamplifier is remote or shielded No external power is needed at detector location Three twisted-pair cables with ground conductor and overall shield between detector and ratemeter for maximum ...

... current producing detectors and displaying the radiation signal in various engineering units; (CPM, mR/h, or μCi/cc). The Model 942A-200 UDR can be used with all Model 943 Series Beta and Gamma Scintillation Detectors. ...

... verified in conformance with IEEE standard 730 (1984). Digital data acquisition and control system Compatible with all detector/sampler assemblies Meets requirements of NRC Re. Guide 1.75 Process control capability Custom ...

... 15% from 80 keV to 1.5 MeV No external power needed at detector location Preamplifier integral with detector Ratemeter may be remotely located up to Single cable between ratemeter and detector ...

... from 70 keV to 3 MeV No external power needed at detector location Preamplifier integral with detector Ratemeter may be remotely located up to 1500 feet Single cable between ratemeter and detector 8 ...

... through an exit hole in the shield to irradiate the detector. The rotating section is spring loaded to return to the closed position, and the mechanical interlocks prevent exposing the source until the detector ...