MIS Implants Technologies drill bits

... irrigation. drills • Drills are made of surgical grade Stainless Steel. • All drills are color coded for diameter. • Drill depth is identified by corresponding groove ...

Length: 4.5 mm - 10 mm

Delta offers a variety of Cannulated Drill Bits and Headed Drill Bits for various techniques and surgical approaches, creates the quality tunnels and sockets for the surgery.

Skeletal Ttraction Drill Product Parameter φ1.0/φ1.2/φ1.5/φ2.0/φ2.5/φ3.0/φ3.5

Flatten surface of alveolar ridge The recommended rotation speed is600-800rpm.

Length: 1.3 mm

VS181 - Micro Series Veterinary Drill Bit Ø 1.3 mm

Implant Drills, Available in various size options. Ref: 25-111-012 (2.0mm) Ref: 25-111-013 (2.5mm) Ref: 25-111-014 (2.8mm) Ref: 25-111-015 (3.2mm) Ref: 25-111-016 (3.65mm) Ref: 25-111-017 (4.2mm) Ref: 25-111-018 ...

Length: 16 cm - 31 cm

available in packages of 10 pieces disponible en paquetes de 10 unidades Trocar point Punte trequarti with round shaft

... Additional laser marking inside the grooves. SIZES Diameters: 2—2,5—2,75—3—3,35—3,5—3,75—4—4,35—4,5—4,75 Lengths: 28—36—39 mm Drills for Short implants: 5—5,5—6 mm in diameter

... perform your surgical procedures correctly and comfortably, there are various innovative instruments in our kit content. Our drills are marked for depth and have stopper. Ease of Use 100% High Efficiency 100% Efficient Workflow 100%

... Endostar Gates Glidden drills are engine-driven istruments and they are used to enlarge root canals orifice and coronal third of the canals. These instruments represent the oldest forms of root canal instruments. Gates ...

Length: 28, 32 mm

1-Single file to complete the preparation 2-Unusually sharp section of chip and chip evacuation enhanced 3-The capacity 4-More flexible than the traditional single file , indications broader A-Good variable pitch design for quick and ...

... Sequence BHI Drill Quality All drills are manufactured from high quality surgical materials Drills are marked by laser for easy identification Depth marks are shown with grooves and ...

Length: 145, 220 mm

1-0012 : 0 3.2mm Total - length 145 mm 1-00164: 0 3.5 mm Total - length 220 - mm 1-0019: 0 4.0mm Total - length 220mm

... -harvesting RBS® drills were developed and tested in hospitals. They are specially designed to ease the IDCAM and IDBIO implant placement. FEATURES The lower section incorporates along cutting thread and tapers to a ...

Spiral Ø 7 mm 2.2X 180 mm cannulated shaft: AO Spiral Ø 8 mm 2.2 X 180 mm cannulated shaft: AO Spiral Ø 9 mm 2.2X 180 mm cannulated shaft: AO Spiral Ø 9 mm 3.8 X 280 mm cannulated shaft: AO Spiral Ø0 10 ...

TAPS FEATURES •Material: stainless steel •Scope: surgery, treatment, thread forming •Maximum rotation speed: 25 rpm / with irrigation •Maximum number of uses: 45 uses DESCRIPTION It is recommended the use of taps in the ...

... fixture. When placing a ORBIT fixture in soft bone (D IV) the surgeon should consider undersizing osteotomy. The final drill diameter should be limited to the one immediately smaller than the diameter that should ...

... diameter of each drill is color-coded as well as etched on the upper portion of the drill. The depth markings are both milled and etched. Every diameter of the parallel drill has five ...

OS200527 2.7mm drill with 6mm shank (4mm pin) OS200438 3.8mm drill with 6mm shank (5mm pin) OS200548 4.8mm drill with 6mm shank (6mm pin)

Length: 30 mm

Core drills are designed to be used for initial osteotomy for implant placement. Core drills come in 2.3, 2.65, and 3 mm diameters and are to be used with their respective Narrow, Standard, and Wide implant ...

... the implant bed site with sequential drilling (straight up-and-down motion during osteotomy). · Drill the osteotomy using light pressure. Recommended drill speed: (Must be individualised based on the ...

Length: 6 mm - 16 mm

TAG drills feature a simple color-coding system, to enable easy identification and use. Comfortable to handle and powerful, our drills are compatible with all TAG implants and come in standard (37 mm) ...