Zimmer bone plates

Length: 67, 99, 131, 163, 277 mm
Thickness: 3.4 mm
Hole diameter: 4, 4.5 mm

... fractures in long bones, for small fragments in the upper and lower limbs. The rigid connection between the locking screws and the plate allows better clinical results in the methaphyseal fracture, comminute ...

Hole diameter: 3 mm

... supracondylar fractures of the distal humerus, - In the surgical treatment of olecranon fractures, -In fractures of Ulna-Radius bones, For fractures and corrective osteotomies of the carpal and metacarpal region ...

Treatment of Spinal Trauma Spinal Degenerative Lesions Spinal Tumors and Infectious Diseases Spinal Congenital Diseases and Malformations.

Length: 90, 230 mm
Number of holes: 3, 12 unit

TRUE LOCK Proximal Humerus Anatomic Plates are indicated for fractures and fracture dislocations, osteotomies, and nonunions of the proximal humerus, particularly for patients with osteopenic bone. Proximal ...

Length: 22, 88 mm
Thickness: 2.5 mm

... Resistance No Cold Welding & bone ingrowth for easy removal Essential in Tumor cases: Enhanced radiation therapy administration Negligible backscattering and attenuation for optimal dosage ​​​CarboClear Cervical ...

Length: 50, 86, 47, 48 mm

... risk of irritation of soft tissues. • The patented screw-plate locking system allows an easy technique and eliminates the possibility of cross-threading between the screw head and the plate. • Up ...

... Two types of plate to choose from: single-row holes and double-row holes ◆ Self-locking integrated structural design and simultaneous completion of screw fixation and locking. Dynamic locking is achieved ◆ Ultrathin ...

Hole diameter: 4, 3.5, 2.7 mm
Number of holes: 6, 5, 4 unit

► Self-tapping Cortex Screw ► Stardrive Self-tapping Locking Screw ► Cancellous Screw The plate is intended for temporary fixation, correction or stabilization in the radius anatomical region.

Length: 25.7 mm
Thickness: 1 mm
Hole diameter: 2.1 mm

Φ 2.1 Holes: 2×4 Length 25.7 Width 12.2 Thickness 1.0

Length: 49, 104 mm
Thickness: 1.2 mm
Hole diameter: 3.5 mm

... polyaxial plate systems. As per the functioning method of the first-type polyaxial plate system, lamellas are designed to be located in the holes of the plate. The plates ...

... Prevents irritation of soft tissues, preserving bone vascularisation. Progressively tapered end to facilitate minimally invasive atraumatic insertion (only in some plates). The LOCKING PLATES ...

Insignia™ Anterior Cervical Plating system is our most tested plate with an active locking mechanism designed for efficiency and the tools to accommodate various surgical techniques. Key Features Active locking mechanism ...

Small size FixButton™ AC Plate is suitable for minimally invasive arthroscopic repair. Anatomical radian design perfectly fits the bone surface, distribute stress evenly and has a good fixation effect. Side ...

In clinical practice for maxillofacial reconstruction, bone grafts, bone cement and standard implants (meshes, plates and screws, augments) used are traditionally shaped manually (bent ...

Length: 19, 100 mm
Number of holes: 4, 10, 6, 8 unit

... and dynamic fixation Combination use of fixed angle screw and variable angle screw Patients with different physique and bone changes, single level and multiple level operation

Length: 51, 63, 80 mm
Thickness: 3 mm
Number of holes: 4, 6, 7 unit

... offer unique low-profile design that provide high mechanical strength and stability, while preserving the system elasticity for bone consolidation. The extensive and accurate instrumentation will convince the most exigent ...

Length: 112, 96, 80 mm
Thickness: 2 mm
Number of holes: 7, 6, 8 unit

Head width 34 mm Leg width 16 mm Hole spacing 16 mm Fixationscrews D 4.5 and D 6.5 mm

Length: 115, 70, 85, 100 mm
Thickness: 3.5 mm
Hole diameter: 4.1 mm

... type II Reduced risk of cold welding Good biocompatibility Left and right plates 4 sizes Common hook size Shaped design for optimal positioning K-wire holes support plate positioning Limited contact ...

... CERVICAL FUSION. The cervical plate includes a simple, compact and practical instrument set. Placing the plate requires only nine instruments. Optimal in combination with the Magnolis® S cervical cage. Product ...

Thickness: 1.8 mm
Number of holes: 3, 4, 5, 1, 2 unit

PLATES FOR ANTERIOR CERVICAL ARTHRODESIS The PM BUTTERFLY® system is intended to provide osteosynthesis between two or more cervical vertebrae thanks to a plate and cervical screws. - ANTERIOR APPROACH - ...

- Optimal Fit - Screw Trajectory - Fully Instrumented System - Pre-contoured Plates

Number of holes: 6, 7 unit

Anatomical profile plate, with compression and locking holes. Features specific profiles for left and right member. – Low Profile; – Low contact; – Tapered tip; – Mask in peek with carbon fiber; – Color system; – ...

Length: 20, 81 mm

1.Low profile, super bonegraft window. 2.Round edge, reducing tissues stimulation. 3.Anatomically prebending desin. 4.Midcourt line sunken design, easy for location. 5.Anti-recess. 6.Simple, effectively anti-pullout of screw.

Length: 90, 210, 126, 138, 114 mm
Thickness: 3 mm
Number of holes: 4, 5, 10, 6, 13 unit

... including one elongated hole that helps in plate positioning In the long plate distal shaft consists of 7-13 elongated combi holes Plates can be used with the LISS Plate ...

Number of holes: 24 unit

PLATES PLATES The plates have shapes to fit on the forehead and orbital area: straight, L, T, double T, Y, double Y, H, semicircular, quadratic, rectangular and micro mesh. STRAIGHT PLATE ...