Medical bed accessories

Universal tie-down, 3 steel bars Ø25 x 1,5 painted in Epoxy-Polyester. Automatic locking system. Total length without handles 138 cm. Height to bed – raised: 37.5 cm. Total width of bed with rails: 105 cm. (for 90 cm bed) 120 cm. ...

Steel columns coated in thermoplastic material. 4 stainless steel bars Ø 25 x 1,5 painted in Epoxy-Polyester. Automatic locking system. Total length with handles: 153 cm. Height to bed – raised: 46 cm. Total width of bed with handrails: 102 ...

UNIVERSAL SIDE RAIL For frame max. 70×40 cm

With a Molift free standing unit, we offer a system that is easy to install without additional fixtures on ceiling or walls. It is ideally suited to temporary lift applications in hospitals, nursing homes or private homes. Lightweight ...

A freestanding traverse gantry Molift Quattro is a freestanding hoist unit that offers a (four post) Traverse System which is the best alternative when the hoisting need is temporary or when the facility is not build for fixed installations. ...

The HTAIR-2300 offers two airflow speeds and a variable speed option for gradual inflation for patients who are sensitive, anxious, and/or in pain. One air supply can be used with our full range of HoverTech products to maximize efficiency. HoverMatt ...

Side Guard - Removable, dimensions 800 x 250 mm (LxH), with clamp for standard side rail Lacquered, Article No. SG-1000/BK Stainless Steel, Article No. SG-3000/BK

stainless steel standard rails (set of two, 25x10mm LxW, with spacers) are available in different lengths : Standard rails, length 400 mm - Article No. OPS-40/A Standard rails, length 600 mm - Article No. OPS-60/A Standard rails, ...

Side guards Side guard (unit), removable - Dimensions 800x250 mm (LxH). Lacquered, see Frame Colours - Article No. SG-1000 Stainless steel - Article No. SG-3000 Note: The removable side guards are not retrofittable. Side guard ...

Rail Locking Clamp Flowmeter rail bracket/rail locking clamp is used to support medical devices. It uses modular design flexibility. Can provide a mounting solution for the hospital. Rail locking clamp could connections with the medical ...

Stainless steel security rails Structure made of chromed or 18/10 stainless steel.

BEST HYGIENIC PROPERTIES stainless steel (1.4301) HIGH QUALITY RAIL PROFILE with standard-compliant edge Length: acc. to customers request End Caps: - plastic, black Total load capacity (kg / m): - max. 100 Rail profile (mm): ...

Material: - Stainless steel 1.4301, matt finish Dimensions (mm): - 64 x 16 x 1,5

BEST HYGIENIC PROPERTIES stainless steel (1.4301) HIGH QUALITY RAIL PROFILE with standard-compliant edge Length: acc. to customers request End Caps: - plastic, black Rail profile (mm): - 25 x 10 x 1,5 Optional: - plastic ...

A new generation of handset for your residents Movement and mobility have a positive impact on many areas of care and have a preventive effect. SafeLift is a unique, wireless mobilization aid for your residents that significantly ...

Used to increase patient independence and mobility. Lifting pole to be used with fixed height bed heads; powder coated.

When caring for the ill, the relationship between the caregivers and the patients is very important. We at wissnerbosserhoff have recognised that we can support an open and friendly atmosphere by means of helpful and innovative products ...

Folding side rails Horizontal containment bars built with anodised aluminium alloy tube. Attachable to the bed headboard with sliding couplings devices and return springs Material Aluminum, Stainless steel

Pair of universal vertically-sliding side rails built with stainless steel tube suitable for all hospital and home beds. They fit under the mattress and are width-adjustable

Pair of vertically sliding universal side rails with adjustable frame to place under the mattress. Built with black coated steel tube suitable for all home non-orthopaedic beds without adjustable sections. Lengthand side-adjustable ...

Length : 90, 105, 120, 135, 150 cm
Height: 190 cm
Width: 20 cm

EFFECTS AND ADVANTAGES It is indicated as a way of protection for the mattress. It is recommended Spécialely for patient suffering of allergies. COMPOSITION 60% polyester, 40% polyurethane Fastener zipper DIMENSIONS 80x190x20 MAINTENANCE ...

Length : 80, 90, 105, 135, 150 cm
Height: 190 cm
Width: 20 cm

EFFECTS AND ADVANTAGES It is indicated as a way of protection for the mattress. It is recommended Spécialely for patient suffering of allergies. COMPOSITION 72% PVC, 6% polyester Fastener zipper SEVERAL SIZES AVAILABLES MAINTENANCE ...

Length : 90, 105, 135, 150 cm
Height: 190 cm
Width: 20 cm

EFFECTS AND ADVANTAGES It is indicated as a way of protection for the mattress. It is recommended Spécialely for patient suffering of allergies. COMPOSITION 70% PVC, 30% polyester Fastener zipper MAINTENANCE Vinyl: washable at 90ºC. Tolerate ...

POLYMETAL proudly introduces cost-efficient “Horizontal 3 Bars Hospital Bed Side Rail”. It is especially designed for homecare beds with maximum height for protection of patients. Also suitable stretchers and manual hospital beds. Assembling ...

2 Pieces Kant Hospital Bed Head & Foot Boards Kant Series hospital bed head & foot boards are designed according to the new electronic hospital bed standard EN 60601-2-52. Blow Molded, Reinforced PP (Polypropylene) Antibacterial ...

Kant Hospital Bed Head & Foot Board Set is designed according to EN 60601-2-52 standards in accordance with new (generation) electronic hospital beds. Technical Specifications Blow Molded, Reinforced PP (Polypropylene) Antibacterial ...

Not only all medical source units being equipped by universal medical rail, other specialized medical workplaces can be equipped by such medical rail too. With use of holders, bearing bars are attached for baskets and infusion hangers, ...

Angular accessory rail (25×10 mm) with “hook on” clamp included (25×10 mm). This angular accessory rail is made to extend the normal rail on an operating table. Also, when a accessory have to be attached ...

Our surgical arm and leg guard safely secure and keep the patient’s arm and legs on the operation table during surgery and transport. The arm and leg guard slides under the mattress of a bed, stretcher or operation table and is ...

Our surgical arm and leg guard safely secure and keep the patient’s arm and legs on the operation table during surgery and transport. The arm and leg guard slides under the mattress of a bed, stretcher or operation table and is ...

*Powder coated steel frame. *20” Width with a cushioned non-slip grip. *Extends full 3 feet under the mattress. *With stabilizing frame and strap. *Adjustable height fits most beds. *K/D assembly. SPECIFICATION Overall height ...

*This adjustable height home bed assist rail/handle provides assistance for getting into and out of your home-style bed. *No-slip foam that helps to hold the bar in place. *The rail has legs that extend to the floor. *The removable ...

*Chrome plated steel frame. *20” W with a cushioned non-slip grip. *Easy slide extends 89cm under mattress. *With stabilizing frame and strap. *k/D assembly. Adjustable height: 43-53cm SPECIFICATION Overall height - 43-53 cm Overall ...

* Made of stainless steel, can be tilted. * Complete with fast locking clamp.

BED SHEET SOFT 50cm x 80m Two-ply bed sheet - Sheet: 50 x 38 cm - 210 sheets - Absorbent - Embossed pattern - Each roll in protective film - 8 rolls in the package

NEXODIS BED SHEET Laminated bed sheet – 2 layers (1 layer of premium tissue paper + 1 layer of high density film). The layers are laminated – they do not split. Each roll is separately wrapped. 3 colors: green, blue and pink Collective ...

Bodyfix is as pyjama-cover that has been specially designed to provide comfort and a very light restrain to very passive patients or with mobility limitations, incontinent, disorientated or with neurological disease, to avoid the access ...

Here you can see our orthopedic appliances: Reusable cover designed to protect mattresses, manufactured with 100% polyester technical fabric with a polyurethane sky blue coating, impermeable, breathable, flame-retardant, anti-bacterial ...

Reusable cover designed to protect mattresses, manufactured with 100% polyester technical fabric with a polyurethane sky blue coating, impermeable, breathable, flame-retardant, anti-bacterial and anti-fungal (ABF). It can be a complementary ...

We offer medical rails used for attaching a wide range of accessories as flowmeters, suction regulators, baskets, trays. Medical rails are very often integrated with bed head units for hospital wards and ICUs. We also have different types ...

Side rails Bipartite ABS Side rails for Hospital Bed TECHNICAL DETAILS 10.AC.1006 TOTAL WEIGHT DIMENSIONS 146x838x534mm + 146x1096x533mm NET WEIGHT 21kg GROSS WEIGHT 22,7kg GROSS VOLUME 0,1487m3 AVAILABLE COLORS Orange ...

Side rails Side rails with extension for Hospital Beds TECHNICAL DETAILS 10.AC.1002 TOTAL WEIGHT DIMENSIONS 30x1530x502mm NET WEIGHT 13,4kg GROSS WEIGHT 14kg GROSS VOLUME 0,113m3

Suspension Column Painted Suspension Column for Hospital Bed TECHNICAL DETAILS 10.AC.1015 TOTAL WEIGHT DIMENSIONS 1850x38mm NET WEIGHT 4,8kg GROSS WEIGHT 5,2kg GROSS VOLUME 0,007m3 MAXIMUM ALLOWABLE WEIGHT 75kg