{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... walls or fine features Mechanical components needing wear and corrosion resistance LaserForm CoCr (C) - for use with ProX DMP 100 and 200 Dental Dental production applications ...
Suitable for the fabrication of: - Single crowns - Single copings - Bridges up to 16 units - Full bridges and VMK technique -> Corrosion resistant
The Cobalt-Chrome blanks (non-precious metal) are highly pre-compressed and slightly sintered, which enables the milling of all dental restorations. Thanks to the fact that the raw material ...
... good solderability of the material. Characteristics For manufacturing of metal frameworks Suitable for veneering with metal ceramics Health-friendly and corrosion-resistant Stable, homogeneous ...
Size: 10 mm - 25 mm
Disc for CAD/CAM system, based on CoCr, free of nickel and beryllium which fulfils the requirement of the standard EN ISO 22674 for non-precious alloys and ISO 9693-1 for alloys intended for porcelain fused to metal restorations. It is ...
Size: 10 mm - 25 mm
Flexural strength: 553 MPa
... beryllium, cadmium and lead free and fulfills the recommendation of the standard EN ISO 22674 and EN ISO 9693-1 for dental alloys. Type 3, Cobalt based, casted discs intended for making metal porcelain ...
Cobalt chrome-based dental alloy Over the last thirty years, as the cost of gold has risen, precious alloys have gradually been replaced by non-precious alloys, such as cobalt and chromium ...
This CoCr-based NEM milling blank is free of tungsten, nickel and beryllium. optimill acero is available in many thicknesses with a step, so that processing in all common CAD / CAM milling machines is possible. In addition to its optimal ...
acero MOG is a Type 5 cobalt/chrome (CoCr)-based model cast alloy for the entire field of the model casting and combination techniques! acero MOG is suitable for flame casting, vacuum pressure casting and the high-frequency ...
... the Ceramill Sintron CoCr sintered metal revolutionizes the production process of metal restorations in the laboratory. Due to its wax-like texture, the material can be dry milled with ease. The material ...
Amann Girrbach
Extremely good processing qualitites due to low hardness. Extremely easy to work with, especially when milling or polishing, due to the unusually low hardness. Excellent veneerability due to the low coefficient of thermal expansion. Excellent ...
DENTAURUM
... Introduction Cobalt SLM powder for dental applications is a specialized material used in 3D printing to manufacture partial frames, crowns and bridges up to 16 units, two-piece abutments, ...
Audental Bio-Material Co., Ltd
Size: 10 mm - 20 mm
The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs. The Facts optimal ...
Whitepeaks Dental Solutions GmbH
Water based phosphate binder coating for cobalt chrome castings. High precision, durability and ease of use in both fast and conventional techniques. Packaging: 20 kg in pre-dosed 400 g bags.
Size: 98 mm
Zfx Cobalt Chromium is a nickel and beryllium-free, veneerable non-previous milling alloy made from cobalt chromium. The material can be used to produce ...
... hardness Greater precision Lower milling tool consumption Less strain on the machine spindle Composition in % Cobalt (Co) 66 % Chrome (Cr) 27 % Molybdenum (Mo) 6% Others Si, Mn Physical and mechanical features Solidus-liquidus ...
Keralloy® BioStar is a precious metal free, chromium cobaltbased milling alloy according DIN EN ISO 22674, type 4. Keralloy® BioStar does not contain any beryllium, indium or gallium. Keralloy® BioStar is easy to mill ...
Size: 10 mm - 18 mm
... according to the manufacturer's instructions for the dental milling machines. CORiTEC CoCr M6 disc can be machined with common CoCr strategies. For veneering use commercially available ...
pritidenta GmbH
Fusion AM is a CoCr dental alloy powder with improved properties for the production of dentures in the laser melting process. The dental alloy is a CoCr composition that ...
scheftner dental
O Product Description 01 Economy Escaping from the conventional, troublesome and complex casting manners, it is possible to reduce 07 Accuracy Provides elaborated identical qualities which cannot be achieved by manual operation 0? Processability Due ...
Flexural strength: 810, 620 MPa
Cobalt 50% Chrome 25% Ferrum 15% Molybdenum 5% Nickel 4% Others 2% Technical Specifications: Melting range(degree): 1335 +/- 50 Yield strength(Mpa): 620 Tensile strength:810 Elongation(%): 3 Rockwell Hardness(HRB): ...
Hunan Vsmile Biotechnology Co. Ltd
... 100g Multi-purpose CoCr bonding alloy for any conventional ceramic Sonderpreisaktion 199€ / 1000g bis 31.12.2022 – Solange der Vorrat reicht! DESCRIPTION >> ADORBOND PREMIUM Casting Alloy Download Multi-purpose ...
the best suppliers
Please specify:
Help us improve:
remaining