Conical implant abutments

Implant diameter: 3.3 mm - 4.8 mm

... the pre-mill abutments with a definitive abutment screw. The abutment screw is also made from a titanium alloy. You can continue to use your original instruments or instruments from ...

Implant diameter: 3 mm - 5.5 mm

... straight abutment is characterized by a high-precision connection. That is why we give a 30-year manufacturer’s guarantee on the straight abutments. The straight abutments are delivered ...

Implant diameter: 3 mm - 5.5 mm
Implant angulation: 20 °

... against rotation. The angled abutment is characterized by a high-precision connection. That is why we give a 30 year guarantee on the angled abutments. The angled abutments are delivered ...

Z2Plus® multifunction abutment The Z2Plus® multifunction abutment can be used not only as an implant carrier but also as an impression abutment for the closed tray technique ...

... Basic® straight abutment (gingival heights: 1 – 5mm). Basic® two pieces straight abutment, suitable for single prostheses (gingival heights: 2, 3 y 4mm). Basic® abutment is available ...

Tx30® Variable Rotation Abutment The ZIACOM® Tx30® Variable Rotation Abutment is the perfect solution for the restoration of angled implants. It consists of a machining Co-Cr base and ...

Implant diameter: 3.8 mm - 5.4 mm
Implant length: 5 mm - 7 mm

Beauty-up Abutment (Angled SCRP) For Screw-Cement Retained Prosthesis with angulated screw channel. Solution for anterior aesthetic zone. The gingival line of the Beauty-up™ Abutment allows more ...

Implant diameter: 3.87 mm
Implant length: 8.3 mm - 13.3 mm

> For Over-denture Prosthesis > Various Sizes and Retention for Various Cases > Abutment Level Impression

Implant diameter: min 4.0 mm
Implant length: 5 mm - 10 mm

> For Implant Supported Over-denture Prosthesis. > Packing unit : 1 Ball Abutment + 3 Inner Caps (1 per each colour) + 1 Block-out Spacer + 1 Outer Cap. > Direct impression.

Screw-on morse tapered abutments Abutment, straight, with shoulder - If Transgingival height: 1,5 mm - 420001 I screw P/N 0211 - Abutment, straight, with shoulder - ...

Implant angulation: 15, 23 °

Abutment, 15° angled, with shoulder - Transgingival height: 1,5 mm - 421501 screw P/N 0211 - Abutment, 15° angled, with shoulder - Transgingival height: 2,5 mm - 421502 screw P/N 0211 - Abutment, ...

Morse tapered abutments (FMC) with shoulder Abutment, straight, with shoulder Transgingival height: 1,5mm screw P/N 0911 420001

Tapered pillar abutments are indicated for screw-retained bridges, prostheses on bars and for the Quattro system. They are available with a 0°, 17° and 30° angle, and in a wide range of periodontal heights.. Angled ...

Implant diameter: 3.8 mm
Implant length: 0.7, 1.5, 3 mm

... narrow S2.9 implants.BioniQ abutments present a wide range of options for individual solutions and customization according to specific needs and the patient's dentition. A narrower diameter of prosthetic ...

Implant diameter: 5.2, 3.9 mm
Implant length: 0.7, 3, 1.5 mm

Robust design with two guide slots Emergence profile similar to a natural tooth The height of the abutment shoulder is from 0.7 mm

Conical BL compatible with STRAUMANN® BONE LEVEL®All abutments include final screw. Transfers include two screws (for open and closed tray).New70

Implant diameter: 3, 6, 4.2, 4.8 mm

New implant connection: CONIC EVOAbutments compatible with Astra Tech Implant System™ EVDESS is proud to present the new CONIC EVO connection, which has been added to the current product range, including ...

- Abutments : Shorter abutments have 4 different margin heights (MH) which depends on the with of the abutment. - Material : Titanium Alloy ( TI - 6AI-4V, ASTM F136 ) - Characteristics ...

Implant diameter: min 4.8 mm

-Fastening Torque: 20Ncm² (Narrow) - 30Ncm² (Regular) -Hex Driver: 1.2mm

Implant diameter: min 4.5 mm

-Fastening Torque: 20Ncm² (Narrow) - 30Ncm² (Regular)