Dental implant analogs

For laboratory fabrication of the implant prosthetics in the Standard system

For laboratory fabrication of the implant prosthetics in the Standard system

SKU: 31045220Analog for Abutment with Snap Attachment

... ASTM-approved titanium Grade 5 replicate the exact position and connection to the implant. This allows to check the fitting accuracy of the final restoration with implant abutments directly on the model. ...

... The new ScanAnalogs by Zirkonzahn replicate in their role as laboratory analogue the exact position and orientation of the implant. However, the ScanAnalogs dispose of a special geometry, integrated in the software which ...

The implant analaog is compatible with the pop-up, pick-up and klip-up systems. Note : Compatible with all diameters except for 3mm diameter

Implant diameter: 5.5, 4.2 mm

... on 2 elements, on all types of teeth except in the incisive mandibular sector. It is also useful for multiple prosthetics. Caution: The abutment should not be adjusted in the mouth because the implant ...

Implant diameter: 3 mm

Klip-up analog. These parts are solely intended for the incisive-canine sector and for single-unit cement-retained prosthesis only.

> Mimicking of Conical Interface of Fixture > Analog of Fixture for Cast Model

Implant diameter: 4.5 mm - 6.5 mm
Implant length: 4.1 mm - 7.1 mm

Implant diameter: 3.5 mm - 5 mm

Implants analogues Specifiche Cod. Platform Ø 3,5 (1 piece) 50020401 Platform Ø 3,7 (1 piece) 50020601 Platform Ø 4,1 (1 piece) 50020501 Platform Ø 5,0 (1 piece) 50020301 For implants “SH - ...

Laboratory analog Cod. 50304101 Titanium - To be used when the abutment is prepared in the laboratory; it reproduces the internal part of implants.

Titanium - It reproduces the bar abutment emergence on master model

Implant diameter: 4, 5, 6, 7 mm

Lab Analog • Directly connected to the Snap Impression Coping in the impression to make a stone modei.

Implant diameter: 4, 8 mm

Lab Analog •Replaçâtes the fixture. •Magenta analog for 03.5 fixture. •Bluo analog for al fixture sizos (or 04.0-08.0.

Implant diameter: 3.2 mm - 5.2 mm

Inclusive® Analog, Solid Abutment 14.3 mmL (5-pack) compatible with: Straumann® Tissue Level RN synOcta® Product Description Inclusive Abutment Analogs are platform-specific replicas of unmodified, prefabricated ...

Made of stainless steel to enable the preparation oflaboratory models.Only for Slim Implants

Implant diameter: 4.5 mm
Implant length: 12 mm

... tapered conical hex connection between implant and abutment interface provides hermetic sealing. · The biological connection distributes the load to the fixture evenly. Therefore it may minimize bone loss. · All implant ...

Implant diameter: 3.5 mm
Implant length: 12.4 mm

... make overdenture using the Positioner 1.Non-tiling plastic Socket having ±5° is recommended as a standard assemWy 2.Make denture based on the white plastic Socket having 10Ogf 3.If the path is not parallel (more than ...

... the amount of soft tissue around implants and to pro-' mote: • élimination of excessive abutment pressure on gingival tissue adjacent to implants; •sufficient interproximal space between implant ...

... the amount of soft tissue around implants and to pro-' mote: • élimination of excessive abutment pressure on gingival tissue adjacent to implants; •sufficient interproximal space between implant ...

... the amount of soft tissue around implants and to pro-' mote: • élimination of excessive abutment pressure on gingival tissue adjacent to implants; •sufficient interproximal space between implant ...

Implant diameter: 5, 4.25, 6, 3.8, 3.3 mm

Implant diameter: 2.5 mm

Implant diameter: 3.3, 4.3, 3.8, 6, 5 mm

The PROSTHETIC ampoule contains: ANALOG: with special anti-rotational connection. SCREW FOR SECURING CYLINDER

Standard prosthetic A complete line of prosthetic products produced with the precision and efficiency of standard technology with high technological level. Dedicated to professionals who require the perfect aesthetic and functional results.

... providing treatment solutions for your implant patients. BSA Surface Treatment Technology The Azure Implant System is designed to provide a high quality, easy to use system so that you can deliver effective ...

Implant diameter: 2.9 mm

... 1st, 2016. A 2.9mm hybrid lab analog used with 3M™ ESPE™ MDI Hybrid Implants & Prosthetics. 3M™ ESPE™ MDI Hybrid Lab Analog MII LA is a hybrid lab analog that measures ...

The new Temporary Snap Abutment replaces the existing Titanium Temporary Abutment for conical connection implants. The design has been upgraded to simplify the temporization workflow and save time for you and your patient.

Implant diameter: 4 mm

... benefit from implant-supported denturesThe Straumann® Novaloc® Retentive System for hybrid dentures offers an innovative carbon-based abutment coating (amorphous diamond-like carbon) with an excellent wear resistance, ...

The Axiom® BL REG/PX prosthesis line is compatible with both the Axiom® BL REG and the Axiom® BL PX implants thanks to its shared, single-diameter conical connection. It can be used for any indication: from catalogue ...

Within the direct concept, the distal implants can be deliberately positioned at an angle in order to take full advantage of the local bone in cases of reduced bone availability and to avoid perhaps a complex augmentation. ...

Implant diameter: 3.3, 4.1, 4.8 mm
Implant length: 9 mm

Implant diameter: 3.5 mm

Implant diameter: 3.4 mm - 6 mm

-Fixture analogs for the lab (to be used with appropriate abutments). Narrow: 3.4 / 3.7 Diameter Regular: 3.7 / 4.2 / 4.6 / 5.1 / 6.0 Diameter

Implant diameter: 4.1 mm