Stainless steel dental implant analogs

Implant diameter: 2.9 mm

... 1st, 2016. A 2.9mm hybrid lab analog used with 3M™ ESPE™ MDI Hybrid Implants & Prosthetics. 3M™ ESPE™ MDI Hybrid Lab Analog MII LA is a hybrid lab analog that measures ...

Implant diameter: 5.7, 4.5, 3.5 mm

Implant Analog Implant Analog, Titanium (NP Platform) 2.9 mmD • Color-coded by implant platform General Information The 3.1 mmD Eztetic Implant ...

Implant diameter: 3.5, 4.5 mm

Product Description For laboratory fabrication of the implant prosthetics in the Standard system For fixing gold copings in the soldering model All Dentsply Sirona Implants Instructions for Use are available ...

Implant diameter: 3.9 mm

> Analog of fixture for working cast. > Use for 3D printing(RP) & Stone model. > Used for all types of Sub. Ti-Base including Multi Unit.

Implant diameter: min 4.0 mm

> Replacement of abutment shape in working cast .

Implant length: min 12.1 mm

> Mimicking of conical interface of fixture. > Analog of fixture for working cast.

Int. Hexag Analogue/ANLG-009-HXI-35 Offer from 24-12-2011 to 31-12-2020Code: 0001827Family: HXI ANALOGUESub-family: HEXAGONALTrade mark: ANALOGUE

OVER DENTURE Easy to insert and remove by your patients, Liberator™ abutments are designed with 4 retention forces coupled with a low vertical profile. Innovative swivel capability of the Liberator™ abutment increases ...

... and final restoration will be aligned exactly as intended. All analogs and transfers are made from high grade Stainless Steel 316. Two flat surfaces allow a controlled tightening of the analog ...

Implant diameter: 3.3, 4, 5, 6 mm

Implant diameter: 3.3, 4, 5, 6 mm

Locator R-Tx™ Abutment Analog 5mm (4/pkg) Article no. REF30016-01 Comprehensive tools and components – for efficient overdenture solutions with Locator R-Tx™ Abutments Note: Delivered non-sterile Technical specification More ...

Implant diameter: 4 mm

... benefit from implant-supported denturesThe Straumann® Novaloc® Retentive System for hybrid dentures offers an innovative carbon-based abutment coating (amorphous diamond-like carbon) with an excellent wear resistance, ...

Implant diameter: 4, 5, 6, 7 mm

Lab Analog • Directly connected to the Snap Impression Coping in the impression to make a stone modei.

Implant length: 12 mm

Implant Analog 3.75mm Technical specification Dimensions: ↨12mm Platform: Internal Hex ID Number: CO-8040

Implant diameter: 4.5 mm
Implant length: 12 mm

... tapered conical hex connection between implant and abutment interface provides hermetic sealing. · The biological connection distributes the load to the fixture evenly. Therefore it may minimize bone loss. · All implant ...

The Axiom® BL REG/PX prosthesis line is compatible with both the Axiom® BL REG and the Axiom® BL PX implants thanks to its shared, single-diameter conical connection. It can be used for any indication: from catalogue ...

Smart solutions on implants CM Connect stands for a broad product portfolio, high quality and compatibility with a variety of different implant systems. The portfolio includes more than 1,200 components ...

Within the direct concept, the distal implants can be deliberately positioned at an angle in order to take full advantage of the local bone in cases of reduced bone availability and to avoid perhaps a complex augmentation. ...

Implant diameter: 3.8 mm
Implant length: 7.1, 6.8 mm

... time without screw loosening, implant fracture or other mechanical failures. Fortunately, recent advances in implant surface, connection technology and overall architecture have enabled the development ...

Implant diameter: 3.3, 4.1, 4.8 mm
Implant length: 9 mm

External hexagon Analog Wide Platform Product Prod.11- Analog Implant compatibility Biomet 3I® Connection External hexagon Model Osseotite 5.0 mm. Platform Material Stainless ...

... manufactured by Carmex Precision Tools Ltd. and distributed by Precise Implant Systems E.S Ltd and are available in a variety of diameters and are made of surgical stainless steel. The ...