{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Width: 857 cm
Height: 1,660 mm
Depth: 1,286 mm
... advantages for on-site medical waste treatment and off-site disposal of medical waste. Cost-Effective • Easy on-site installation removes need to transport waste to an external ...
Width: 1,290 mm
Height: 2,150 mm
Depth: 2,039 mm
... as 15-35 minutes with up to 150 kg of medical waste which can be processed in our clinical waste disposal unit. After being treated in the ISS, the waste is sterile. The liquid components of the waste ...
... Up to 30% and more reduction in waste management ...
Width: 1,300 mm
Height: 1,450 mm
Depth: 895 mm
... an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 4,8 to 8 kg/cycle - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste TREATMENT ...
Tesalys
Width: 1,300 mm
Height: 1,210 mm
Depth: 895 mm
... an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 2,4 to 4 kg/cycle - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste TREATMENT ...
Tesalys
Width: 1,900 mm
Height: 1,918 mm
Depth: 1,209 mm
... treating infectious healthcare waste using a non-burn thermal process (steam sterilization) at 135°C. It simultaneously shreds and sterilizes biohazardous waste including sharps in minutes! Deal for bagged waste ...
Tesalys
... shred and sterilize infectious waste to reduce its volume, and render its components unrecognizable all in one fully enclosed and automated, stainless steel, system. It combines shredding, direct steam and high pressure ...
ECODAS
Weight: 28 kg
... when handling medicinal products with cmr properties. SealSafe® pro units from Berner are used to safely seal such waste into a special tubular film. The sealing process is triggered without contact by an IR sensor. Hazardous ...
Berner International
... Volume of Feed Hopper: 125 L Process Capacity per Cycle: 250 L TECHNICAL DATA Weight: 2 T ENVIRONMENTAL IMPACT / ECO – BALANCE Volume Reduction Potential per Year: 65.700 L CO₂ Reduction Potential per 600 km: 2.795 T ...
... On-site Medical Waste Disposal Solution for Hospitals Gient Integrated Autoclave with Shredder MWI-150 is an ideal solution for medical waste treatment in hospital. In MWI-150 the shredding and sterilization ...
Gient
... axle crushing system to shred medical waste. At same time , supply pure water into jacket to set level. Start electric heater. PTC heating system of discharging port at bottom also Temperatureof134 ~ ...
the best suppliers