Resin dental materials

Flexural strength: 130 MPa - 2,000 MPa

... Plus

• Material: self-curing acrylic resin

... the syringe, aligning the notch. Then turn the tip 90° clock-wise. Step 4: The intraoral tip can be rotated and the angle adjusted. Step 5: For intraoral use, it is recommended to cover AH Plus Mixing Syringe ...

... Overview

• VarseoSmile® TriniQ® by BEGO is a ceramic-filled 3D printing resin designed for dental restorations. It delivers high material stability suitable for permanent single restorations

... Model Resin (designed for Form 4) rather than Draft Resin.
Caractéristiques / spécifications techniques

• Brand: Formlabs
• Denomination commerciale: Draft Resin V2
• Compatible

Size: 14, 20, 25, 18 mm

... Any standard 98 mm zirconia, PMMA or wax blank with shoulder, up to 25mm thickness, can be used in Planmeca PlanMill® 60 S. For bite splints Transparent splint material For models Model disc ivory ...

... Product summary
Ready-to-use temporary filling material based on a synthetic resin, intended for temporary coronal sealing after endodontic or restorative procedures. Provides sufficient short-term strength ...

... As per our Terms and Conditions, this product is ineligible for returns due to its requirement for specific temperature and storage conditions. Specifications Compatible System Straumann® P10+ Straumann® P20+ Straumann® P30+ Straumann® P40 Straumann® ...

... on many years of clinical experience. It can be used to create esthetic composite veneers on crowns and bridges, for temporary applications and for the fixation of denture teeth in prosthodontics thanks ...

... Dentsply Sirona offers permanent root canal sealers based on epoxy-amine resin that delivers self-adhesive properties with dimensional stability and high radiopacity. An endodontic permanent sealer based on epoxy chemistry offers excellent ...

... LC & VITAVM®LC flow are a light‑curing, microparticle composite system for extraoral veneering of fixed and removable restorations. The range includes paste composites and low‑viscosity flow materials that can be combined ...

... Product Overview
Premise™ is a universal nanofilled restorative composite for direct anterior and posterior restorations. It combines a tri‑modal filler system (including 0.4 µm barium glass with Point 4 technology) and pre‑polymerized ...

Flexural strength: 150 MPa

... premium composite resin that can be used to additively manufacture biocompatible permanent restorations including crowns, inlays, onlays, veneers, and artificial teeth for dentures. This FDA-cleared (510(k) ...

Flexural strength: 100 MPa

... basis: the transparent Ceramill A-Cast resin delivers reproducible results for the CAD/CAM fabrication of crowns and bridges. Features Easy fabrication of lost molds: Ceramill A-Cast is a transparent resin designed ...

... issues. Although the amount of BPA released in saliva by resinous materials is thousands of times lower than the minimum safest dose, there is a trend to eliminate BPA from restorative dental products. Polishing and ...

... various materials on the micro scale to create digital composite materials with new properties. Blend rigid and flexible materials to achieve varying shore values. Combine opaque and ...

... DM12 Implant Model (Geller Model) Dental Model DM12 is the ideal choice for printing separated models for crown and bridge application. DM12 optimizes model precision through its lower elasticity and higher flexural ...

... Flashforge 3D Printing Resin Compatible to most LCD 3D printers and with good stability, FlashForge LCD 3D resin print takes advantages of flat plane curing and exposing, ensuring print precision and print success rate. ...

... Dental Cast Resin Dental Cast Resin, is suitable for making the dental cast, partial dentures, etc. Features High precision Combustion without residue Smooth finish Small ...

Size: 95 mm - 95 mm

... Resin with natural colour gradient and improved translucency, flexural strength as well as fracture and abrasion resistance. Specifically designed for the production of denture teeth, long-term temporaries as well as ...

Size: 16 mm - 40 mm

... Gingiva-coloured resin featuring high fracture resistance and flexural strength, ideal for manufacturing denture bases. Its nearly monomer-free composition makes it particularly health-friendly.

• Nearly

Size: 16 mm - 40 mm

... Gingiva-coloured resin featuring excellent fracture resistance and high flexural strength, ideal for manufacturing denture bases. Its nearly monomer-free composition makes it particularly health-friendly.

• Pratiquement

Size: 16 mm - 30 mm

... ACPW9825T — PMMA TRANSPARENT DIAM. 98 H. 25 — Price: 55,00 € — In stock: 11

• Material:

Flexural strength: 11.1 MPa

... production of high-precision dental models, 3DB COMPACT Model Pro Almond provides a fine surface finish for accurate scanning. It delivers consistent print performance, smooth surfaces and predictable machinability, suitable for dental ...

Flexural strength: 11 MPa

... Product overview
Engineered for precision in dental workflows, the 3DB COMPACT Water Washable Model is a grey, water-washable 3D printing resin supplied in 1 kg packaging. It provides ultra-defined detail and ...

Size: 12 mm - 25 mm
Flexural strength: 114 MPa

... CC DISK PMMA is used in CAD/CAM milling machines for making temporary restorations, forgingiva formation after placing dental implants and for accurate determination of the occlusal contactsbefore placing zirconium prosthetic ...

Size: 12 mm - 25 mm
Flexural strength: 178 MPa

... removable dental prosthesis, abutments (where virtual library is available) and root posts. Extremely light, biocompatible and high-performance polymer PEEK (polyether ether ketone) material represents an alternative ...

Size: 15 mm - 20 mm
Flexural strength: 114 MPa

... The CC DISK PMMA Multilayer is intended for use in CAD/CAM milling machines for the production of temporary restorations, gingiva formers directly after implantation, for study try-ins and for checking the occlusal contacts before the ...

Flexural strength: 125 MPa

... Overview
Dental PMMA (Polymethyl Methacrylate) discs designed for milled temporary restorations. Multilayer color architecture provides natural, lifelike aesthetics during the transitional period. Typical mechanical ...

Size: 20 mm

... anaxCAM

... and repair of composite and ceramic restorations, initial composite layer

... among the materials for temporary restorations. Significantly increased proportions of the filler and the catalyst (10:1) allowed for an excellent esthetics and mechanical strength. Consequently, both dentist and patient benefit from ...

... Thin flow, easy to mix Liquids A and B are mixed within 30 seconds Can be poured into silicone, alginate, hydrocolloid, and other impressions After 90 minutes, models are hard enough and can be ground and sawed Set includes: 250 g Liquid A, 250 g Liquid ...

... - Ease of use - Versatility - High aesthetic result even with reduced thickness - Abrasion and breakage resistance - Low bacterial plaque adhesion - Biocompatibility Available colours for dentine, collar and enamel: A1 - A2 - A3 - A3,5 - A4 - ...

Size: 98 mm

... The Zfx Poly X ML blanks consist of methyl methacrylate (PMMA)-based multi-layer acrylic polymer, with toxic or allergenic substances (in accordance with ISO 10993-5). ...

... Glass-fiber CAD/CAM composite block for post-and-cores milling, made of 80% unidirectional radiopaque glass fibers embedded in 20% epoxy- resin, allowing for the first full metal-free post-and-core system. ...

... Composite material with PEEK matrix for parts with high structural characteristics Carbon PEEK is a composite material reinforced with carbon fiber, with extraordinary characteristics in terms of mechanical, thermal ...

... Light-curing orthodontic acrylic For the fabrication of orthodontic appliances. Extremely easy to use. Saves time and material. Optimal flowability. Wide range of applications. Completely odorless. ...

... from the syringe, economical to use. Ideal modelling properties, thixotropic, MMA-free. Can be polymerised with all standard dental polymerisation lights. Medical device Cl. IIa Colour: pink-transparent ...

... Fillings with minimally invasive preparation technique Fillings of small cavities and extended fissure sealing Replacement fillings of cavities with undercuts Fillings of classes III to V incl. V-shaped defects and cervical caries Repair of fillings ...

... Especially developed prosthetic PMMA acrylic for the pouring method for rational processing of partial and complete acrylic prosthetics. The excellent pouring property is especially adjusted for the silicone ...

Flexural strength: 100 MPa

... Light-curing plastic for the production of burn-out molded parts for the dental casting technique. The material is highly compatible: it can be used with all commercially available embedding materials. ...

... light-cured, resin-modified calcium silicate. Its unique apatite stimulating ability makes it ideal for direct and indirect pulp capping and as a protective liner. Resin-Modified Calcium Silicate Pulp Protectant/Liner TheraCal ...

... ORTHODONTIC SELF-CURING ACRYLIC RESIN Specific for orthodontic use, either for spray-on or doughing techniques. The special composition of liquid monomer has careful processing properties, without priming of the curing process (exothermic ...

... fluoride-releasing composite sealant. It is strong and wear resistant because it is a 58%-filled resin and has low polymerization shrinkage. The spiral in the Inspiral™ Brush tip causes shear thinning of the filled, thixotropic ...

Flexural strength: 110 MPa

... If you use 3D printer in dental field, manufacturing a dental model is the first thing you would try and universalize. Unlike existing impression, you can save time and money by acquiring oral data with intra oral scanner ...

Flexural strength: 138 MPa

... LT Crown UV is a bio-compatible resin material specifically designed for making long-lasting crowns and bridges. It contains ceramic fillers and has exceptional mechanical properties. The printed model ...