Respiratory humidifiers

... to know the new FOG 2140A, a Humidifier with a servo-controlled heating system that sets inspiratory gas temperature and can be adjusted at different temperatures. After setting the temperature, the respiratory ...

... parameters. Variety of Circuit Options Suitable for Invasive or Non-Invasive Ventilation, and Heated or Non-Heated Wire Breathing Systems. Positive Connection Heater Plate with spring loaded locking mechanism ...

Dimension : 13.5 x 14.5 x 15.5 Cm Weight : 3.2 Kg Status : Preorder XHumi Humidifier is a warming and humidifying device designed for HFNC, ventilators and other positive pressure ventilating systems. FEATURES Dynamic ...

Humidifiers have a diffuser, through which the flow adjusted by the flowmeter passes, which bubbles in the water and allows small particles to mix with the flow of oxygen or compressed air.

... have sophisticated patient breath recognition and triggering systems. Hydraltis 9500neo respiratory humidifier and DEAS complete line of unique heated breathing systems compliment ...

... 8185:2007 for medical respiratory humidifiers. The diffuser provides excellent gas/liquid exchange. It is easy to clean with its low number of parts. Its closing/opening is done in one turn. Its 250 ...

Supply Power 200V~50Hz High Temperature Alarm >85°C Power 105W Cutting Overheating 95±7°C temperature Temperature setting ...

It is very well known fact that Oxygen has a drying effect at the airways when inhaled at high concentrations especially. That’s why, when it is used for Oxygen Therapy for long term, it must be humidified for avoiding the dryness effect ...

AH-01 • Reusable Stainless • Steel connection • With safety valve AH-02 • Reusable • Brass connection • With safety valve AH-03 • Reusable • Plastic connection • Without safety valve AH-05 •Reusable •Aluminum ...

Single Use: Single patient use Designed for long term durability 350ml capacity Audible safety pop off alarm and a quad nut connector clear markings of maximum and refill water level indicator. Auto-Clavable: Long term duribilty 350ml ...

The AIRcon Gen2 respiratory air humidifier has undergone extensive further development and is among the most advanced humidifiers available on the market today. As a fully equipped humidification ...

AHC-3000 system is suitable for the temperature and humidity therapy and is designed with patient safety and reliability in mind Achives optimal humidity ADVANTAGES Temperature and humidity display Easy to see breathing circuit ...

... temperature of the electrical heating plate to raise the temperature of the distilled water in the chamber and adjust the respiratory gas supplied from the mechanical ventilator to the patient at appropriate temperature ...

The Fisher and Paykel MR850 Heated Humidifier is a sophisticated electronic humidifier that is suitable for use with infants and neonates. The humidifier is easy to use with one button ...

Respiratory Humidifier is designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 Respiratory humidifier (Medical Humidifier) ...

... to maintain and transport. The equipment presented must be used only by health professionals trained and certified in respiratory assistance for patients and under their sole responsibility. EPSIMED is not responsible ...

... used for treatment in the respiratory tract in critically ill patients prevents the patient from performing inhaled gas humidification and heating functions. BioAQUA prevents cold and dry medical gases from damaging the ...

Air-Bubbler™ provides CPAP to spontaneously breathing neonates and infants who require breathing support because of prematurity or any other conditions CPAP prescribed by doctors. Air-Bubbler™ allows ...

Nylon lid with gas identification painting and nylon nut inlet, 400 ml autoclavable polycarbonate bottle with minimum and maximum levels marking, 1.20 m PVC tube and PVC mask. Standard DISS connection.

Dry gas is produced from oxygen and medical air feeders. Breathing dry oxygen can irritate the upper respiratory tract of the patient. Therefore, in order to prevent negative reactions after a patient ...

... Flowmeter, Oxygen Therapy Device products. Humidification Cup Lid is made of chrome-plated brass material. Polycarbonate humidifier bottle with 0,20 lt and 0.25 lt capacity (suitable for 121 and 134 degrees autoclave)

... Maximum gas flow 32 l/min. The humidifier is autoclavable up to max. 134°C. Intended for use in clinics and hospitals. The humidifier is certified in accordance with EN ISO 8185. CE marking according ...

1.Foaming Type Humidifying Bottle: Adopt a special sound-proofing foaming device, which can effectively increase the contact area and time between oxygen and humidification fluid without influencing the patients. 2. Surface Humidification ...

The Viomedex Respiratory Humidifier delivers optimal levels of humidity and is fully compatible with our breathing circuits, humidification chambers and electrical adapter leads. It can ...