Screw implant abutments

Implant diameter: 3 mm
Implant length: 3, 1.5, 5, 4 mm

All our abutments Ø 3 mm are delivered with 1 transfixation screw (ref. K30VP). This screw is also used for the laboratory. Note: There are two angulations available: 7.5° and 15°

Implant diameter: 4.9 mm
Implant length: 2, 3, 4 mm

... The connection is common for all diameters of implants Angulations of 0° - 17° - 30° The conical abutments are tightened using the manual screwdriver Ref.KMPE and the prosthetic torque wrench ...

Implant diameter: 3.6 mm
Implant length: 2, 3, 4 mm

The prosthetic parts are available in 2 diameters and 4 gingival heights. The connection is common for all diameters of implants.

Implant diameter: 5, 6 mm
Implant length: 6, 8 mm

> For Cement Retained and Screw-Cement Retained Prosthesis > Cutting Surface for Anti-rotation of Prosthesis > Connection with Coping Screw > 1.2 Hex Driver > Connecting Torque Force : 35 N/cm > Fixture ...

Implant diameter: 4.1, 5.1 mm
Implant length: 13 mm

> For Screw Retained Prosthesis > Modifcation to Angulated Abutment, Customized Abutment and Telescopic Abutment > CCM Alloy Core for Precise Connection > Cast with Non-Previous ...

Implant diameter: 4 mm - 6 mm
Implant length: 4.55 mm - 6.75 mm

> Packing Unit : 1 Ti-Base + 1 Abutment Screw > For Screw-Cement or Screw Retained Abutment > Titanium Base for Strength of CAD/CAM Customized Zirconium ...

Implant diameter: 4, 2, 3, 1 mm

... 50400301 Natural titanium - h 4 50400401 Titanium - To be used in cases of implants with limited misalignment; can be angled in 6 positions and screws onto the implant to 30 Ncm ...

Implant diameter: 3, 2, 1, 4 mm
Implant angulation: 15 °

... 50401301 Titanium - It allows the axis of the prosthesis to be re-aligned with implants angled by around 10°-20°; can beangled in 6 positions and screws onto the implant to 30 Ncm ...

Implant diameter: 4, 3, 2, 1 mm
Implant angulation: 30 °

... 50402301 Titanium - It allows the axis of the prosthesis to be re-aligned with implants angled by around 25°-35°; can be angled in 6 positions and screws onto the implant to 30 Ncm ...

... Scanning Abutments Inclusive® Scanning Abutments are used to transmit highly accurate position and angulation data of seated implants when scanned with an intraoral or desktop digital ...

Implant diameter: 3.25 mm
Implant angulation: 20, 10, 30 °

Access AbutmentsThe Access Abutment design expands the indications for the Neoss® system by allowing for screw-retained restorations requiring 10°, 20° and 30° of angulation with as little as 4.5 mm of ...

Implant diameter: 3.5, 5.5 mm

... position of the implant, irrespective if used intra-orally or model based. The Neoss ScanPost is suitable for deep sub-gingival implants. Two emergence profiles – The offer for Neoss implant ...

Implant diameter: 3.25, 3.5 mm
Implant length: 1 mm - 6 mm

... Neoss® Equator Abutment is designed for use with full or partial dentures. The self-locating design allows a patient to easily seat their denture. Assortment Neoss® implants Ø3.5 - 6.0: 1-6mm Neoss® ...

Implant length: 1.5, 3, 4 mm

... the amount of soft tissue around implants and to pro-' mote: • élimination of excessive abutment pressure on gingival tissue adjacent to implants; •sufficient interproximal space between ...

... and trusted brand for overdenture restorations. Combining innovative patented technology with availability in more than 350 implant connections has propelled it to be the preferred choice of clinicians with more than ...

Multi-IM® Externa® Straight Connection The abutment of choice for screw-retained multi-unit restorations, immediate load and for overdenture bars and clips.

Implant diameter: 2.2, 4.5 mm
Implant length: 5.2, 6.2, 7.2, 8.2 mm

Implant diameter: 5 mm
Implant length: 4, 6.5 mm

Implant diameter: 2.2 mm
Implant length: 3.4 mm

Implant length: 4 mm - 7 mm

Solid Abutment is one of the final abutments connected fixture and composed of oneness form with Abutment and Screw. Cuff has diverse height(4.0~4.0mm) depending on ...

... Screw and Abutment Screw by Set. Straight Type is composed of oneness form and Angled(17°, 30°) Type is composed of Set. Superstructure of Straight Type has form to combine with Cylinder ...

Implant diameter: 3.5 mm

... providing treatment solutions for your implant patients. BSA Surface Treatment Technology The Azure Implant System is designed to provide a high quality, easy to use system so that you can deliver effective ...

Implant length: 8 mm

For chair-side restorations – abutment with engaging anti-rotational plastic coping allow for temporary cement-retained single unit restorationsTime-efficient – immediate temporization avoids a second-stage procedure ...

Implant angulation: 3, 4, 15 °

Two-component with straining screw High flexibility with various sizes and two angulations Abutment selection chairside, the abutments remain in the patient's mouth Simplified supragingival ...

Implant diameter: 5 mm
Implant length: 10 mm

NNC Temporary Abutment VITA CAD-Temp®Height 10 mm, Ø 5 mmPMMA, TANThe CrossFit® connectionfeatures four positions and a conical portion that makes handling easier and provides confidence for component positioning.A wide ...

Implant diameter: 4 mm

Multiple-unit or full-arch restorations screwed on axiom® REG/PX implants presenting a limited inter-implant distance w Narrow straight abutments with specific secondary components. w ...

Implant diameter: 3.4, 4 mm

... concept, the distal implants can be deliberately positioned at an angle in order to take full advantage of the local bone in cases of reduced bone availability and to avoid perhaps a complex augmentation. Angulation of ...

Golden tapped Hexagonal abutments Straight Slim abutment for Platform switch + retaining screw P/N 0215

Implant diameter: 4.5 mm - 6.5 mm
Implant length: 4 mm - 7 mm

-An abutment and a set screw, used for fixed prostheses -Hex driver: 1.2mm. -Fastening Torque: 20Ncm² (Narrow) - 30Ncm² (Regular) -Protect cap: Optional.

Implant diameter: 3.4 mm

Locator™ abutment Hexcel (Si33). component to screw in the implant. Titanium aliage recover by titanium nutriture.

Implant diameter: 3.75, 5, 4.4 mm
Implant length: 0.5 mm - 2.8 mm

Snap structure connected by a click to the removable denture. The abutment is available in different heights – 0.5,1,2,3,4,5,6mm – selected according to the height of gums. The snap abutment is designed ...

... more. Abutments4life for the dental practice: The LTS-Hybrid® abutments from Abutments4life are fully anatomical, prefabricated solutions for restorative prosthetics on implants. The ...

Implant diameter: 2.5 mm

... test of time without screw loosening, implant fracture or other mechanical failures. Fortunately, recent advances in implant surface, connection technology and overall architecture ...

Implant diameter: 3.5 mm

Pillar Kit+Processing Pack/K. PILO-055-HXE 1mmCode: B331Family: HXE LOCATOR TYPESub-family: CIRCULARTrade mark: LOCATOR TYPE

Implant diameter: 4 mm - 6.5 mm

... prosthesis - All-in-one abutment and screw structure Conventional Abutment and sylbutment The principles of The principles of SYLBUTMENT are easily discovered around us. In a conventional ...

AESTHETIC MINOR UNIT STRAIGHT MULTI-UNIT 3.75 PLATFORM H = 1.0 mm