Sensors for the medical industry

... silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.The SSC Series is fully calibrated and temperature compensated ...

... is a piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and temperature compensated for sensor ...

... magnetics are available.Band gap regulation provides stable operation over 3.8 Vdc to 30 Vdc supply voltage range. These sensors are capable of continuous 20 mA sinking output and may be cycled as high as 50 mA max. ...

... CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination. Advanced Predictive Diagnostics This DO sensor has Intelligent Sensor Management ...

... series ultrasonic oxygen sensors are an economical gas sensors used to detect oxygen concentration in binary gases. By adopting ultrasonic detecting technology and principle of TOF (time ...

... 8500FS-L40 sensor has remarkable performances: high accuracy, fast response, continuous monitoring, no drift, no need routine calibration, maintenance-free, etc. Gasboard-8500FS-L40 sensor is very suitable ...

... ultrasonic oxygen gas sensors, which can realize accurate and stable measurements for oxygen concentration and flow rate. Gasboard-7500H series provide a new, economical, durable option for system designers ...

●Compatibility Brand: Analytical Industries,Atom,CareFusion,Criticare,Draeger,Hamilton Medical,Maquet,Maxtec,Puritan,Bennett,Sensidyne,Teledyne ●Product Features: Long service life, accurate measurement; Compatible ...

... pressure compensation: Within very wide pressure range of 400-960mmhg, it maintains measurement accuracy by onboard barometric sensor. 7.The patented filter can continuously work in long time and be used repeatedly, ...

... pressure compensation: Within very wide pressure range of 400-960mmhg, it maintains measurement accuracy by onboard barometric sensor. 7.The patented filter can continuously work in long time and be used repeatedly, ...

... temperature and humidity intelligent sensors with high accuracy, no cable; for longer cable length purchase ZED extensions. Intelligent sensors are much more than simple sensors. The ...

... internal sensor, with connection cable to the DeepWave LoRa of 50 cm length. The idea of ​​a Smart Sensor is based on the fact that by containing the calibration data inside, the recalibration takes ...

... as you will receive the new calibrated sensor BEFORE disconnecting the one with expired calibration to be sent back to Tecnosoft)ù Easy to use: no configuration to perform when changing sensors. Connected ...

Pressure range: -0.1 MPa - 1.6 MPa

... process. Additionally the dew point sensors are offered with an integrated pressure sensor, combining a pressure and dew point sensor into a single instrument. The optional OLED display ...

Pressure range: -0.1 MPa - 35 MPa

... process. Additionally the dew point sensors are offered with an integrated pressure sensor, combining a pressure and dew point sensor into a single instrument. The optional OLED display ...

Pressure range: 0.1 MPa - 1.6 MPa

... unique sensor system, which combines a QCM and a Polymer sensor in a single unit, enables the user to measure the dew point in a range from -100 °C Td up to +20 °C Td without having any drawbacks in terms ...

Manufactured according to BS standard. It has special connection outlets for O2, N20, Medical Air 4, Surgical Air 7, gases. They are products with a chrome-plated body that provides a gas-specific nameplate, safe hose connection.

Produced in accordance with AFNOR standard. It has special connection outlets for O2, N20, Medical Air 4, Surgical Air 7, gases. They are products with a chrome-plated body that provides a gas-specific nameplate, safe ...

It has special connection outlets for O2, N20, Medical Air 4, Surgical Air 7, gases. They are products with a chrome-plated body that provides a gas-specific name plate, safe hose connection. O2 1601.10 Vac 1602.10 N2O 1603.10 Air ...

The IST AG PW RTD sensor has been developed as an alternative to the traditional wire-wound sensors. The PW sensor combines the advantages of high accuracy and precision of the wire-wound ...

... flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and ...

... available - Detection of flow direction - Customer-specific sensor layout upon request The IST AG MFS gas flow sensor is optimal for measurements in process control, hand held devices ...

Pressure range: 15, 200, 100 bar

The FLOW UNITs are bidirectional flow rate sensors compatible for stand-alone use with the Line Up™ controllers, or with any other microfluidic control system such as the MFCS™ series using the Flowboard hub. Available ...

Pressure range: -1,000 mbar - 7,000 mbar

The PRESSURE UNIT is a stand-alone sensor for continuous measurement of the pressure in a fluidic path. The product line can detect values over the range of -1000 mbar (-15 psi) to 7000 mbar (100 psi). The sensor ...

... controller. It can be used to measure and display flow-rate with any flow control system. Multiple Up to 8 individual sensors Compact Uses minimum bench space Adaptable Compatible with any system Smart Regulation ...

... CapnoLine Plus LH As a professional manufacturer of various quality medical sensors & cable assemblies, Med-linket is also one of the leading suppliers of reusable spo2 sensor in ...

... Module (External) Brand: Medlinket Applicable Person: Adult, Pediatric, Infant Descriptions: 8pin, 9pin; Sidestream EtCO2 Sensor Compatible Brand: Respironics, Masimo, ZOLL (E/R Series), Philips, Mindray (China) Original ...

... 42671, 0010-10-42664 As a professional manufacturer of various quality medical sensors & cable assemblies, Med-linket is also one of the leading suppliers of reusable spo2 sensor in ...

Medical Temperature Probe Working principle： - The temperature is obtained based on the characteristic that the resistance value of the thermistor changes with temperature. Product name and specifications: ...

Medical Temperature Probe Compatible brand: CREATIVE、Nanjing Shidi 10K Series Probe style: 2Pin Cable length: 3m Working principle： - The temperature is obtained based on the ...

Adult Disposable Ear Canal Foam Skin Temperature Probe Quick Details: Product Name: Disposable Adult Skin Temperature Probe Model no.: AMD-DP-EC0007-X Compatible brand : VR medical ...

We have been selling a wide range of monitoring accessories since 2002. This includes SpO2 sensors and devices as well as ECG cables, temperature sensors, blood pressure cuffs and oxygen measuring cells. Please ...

Jack Body consists of Aluminum Material. Gas Jacks consist of Chrome Plated Brass Material.

Jack Body consists of Aluminum Material. Gas Jacks consist of Chrome Plated Brass Material.

Jack Body consists of Aluminum Material. Gas Jacks consist of Chrome Plated Brass Material.

EMG MyoScan Pro is a pre-amplified surface electromyography sensor used with the ProComp Infiniti channels C – H for RMS sEMG. Features a range switch in the sensor head to change filter settings between ...

Bend sensor is small enough to be placed on fingers and wrists to monitor joint motion 180 degrees of flexion. Use sensors back to back to get a 360 degree range. Length: ~152cm (60”) Weight: ~10g Bend ...

The Probe is the mobile part of the terminal units which, by inserting it into the socket, allows the shutter to open and the consequent passage / withdrawal of gas. The coupling, like all the components of the terminal ...

... a special labeling for gases. They are used to deliver the required gases from the terminal units to the patient or medical equipment via hose connections or direct connection to the equipment. The probes ...

... Electrode - SS 316L (1.4435), stainless steel - Isolator - PEEK - Roughness Ra < 0.4 µm Temperature sensor - Pt1000, accuracy ±0.2°C Sensor mounting - Sanitary flange, 1½" Operating temperature ...

A state of the Art sensor for all WFI and Ultra Pure Water application. The NPT adaption allows a huge installation range in steel and PVDF tubes. Detailed certificates are delivered with the sensor. The ...