Single-stage pressure regulators

Output pressure: 4.2 bar

... outlet pressure level. Each model is equipped with mechanical safety valve, so it is absolute impossible that high pressure will come out of regulator to medical device or patient. Each ...

AIR pressure regulator for gas bottle fitting With Pin-index and mini connector

... specified (as required) All Valves are factory pressure tested on assembly Simple Cleaning & Serviceability Procedures Spare Parts available for replacement (if required) Pressure ...

3/4 or 5/8 Regulator With Oxygen Gas Connector (Regulator Connected To The Cylinder)

Ohio Medical’s Continuous Vacuum Regulator provides regulated continuous suction for tracheal and pharyngeal airway management, surgical procedures, trauma suctioning and continuous nasogastric drainage. The Suction Regulator ...

Flow: 0 l/min - 25 l/min
Inlet pressure: 0 bar - 315 bar
Output pressure: 0 bar - 5 bar

The Oxygen Regulator reduces the high pressure coming out of the tube to 4-5 bar and brings it to the appropriate level for the patient. It can be adjusted to the desired outlet pressure. DIN-BS ...

Flow: 40, 28 m³/h
Inlet pressure: 8, 4 bar
Output pressure: 0 bar - 8 bar

First stage pressure reducer for cylinder, high load Nickel – plated brass body Safety valve Gauge range 0-315 or 0-160 bar ( HP ) Gauge range 0-16 bar ( LP ) Outlet fi tting hosetail ...

Flow: 0 l/min - 801 l/min
Weight: 600 g

They are the units that take the vacuum by regulating it from the Vacuum Socket and provide it to the device.

Flow: 400, 200, 130, 80 m³/h
Inlet pressure: 50 bar
Output pressure: 0 bar - 40 bar

... medical pipeline regulator is mainly found in the area of central gas supply systems for medical gases. The pipeline regulator is used either as a supply regulator in a cold vaporizer ...

Flow: 1, 0.5 l/min

The benefit of this regulator is the ease of use it offers – you simply turn it on and off. There is no fine tuning required to control the flow of gas as it is all done automatically. Routine Maintenance Calibrate ...