Height-adjustable X-ray table AGA-POWER-LIFT

Product overview
The AGA-POWER-LIFT X-ray tables feature two adjustable lifting columns operated synchronously by an electric motor via a hand switch with two buttons. They provide electric height adjustment for radiological examinations and are available in multiple widths and tabletop configurations.

Available versions

• X-ray table, Article No.: RGL-1065/EE, 650 mm wide – one-piece, continuous tabletop
• X-ray table, Article No.: RGL-1080/EE, 800 mm wide – one-piece, continuous tabletop
• X-ray table, Article No.: RGL-1065/KEE, 650 mm wide – two-piece tabletop, headrest adjustment by grid (13 locking steps)
• X-ray table, Article No.: RGL-1080/KEE, 800 mm wide – two-piece tabletop, headrest adjustment by grid (13 locking steps)

Features

• Black, radiolucent support plates (tabletop) made of regenerated PE-1000; thickness 15 mm (650 mm width) or 25 mm (800 mm width)
• Base frame supplied with levelling feet as standard for stable floor support
• Electric height adjustment approx. 550 – 800 mm, controlled via a hand switch with two buttons (up/down)
• No metal parts in the area between the lifting columns (radiolucent area approx. 1,300 x 600 mm for 650 mm table / 1,300 x 750 mm for 800 mm table)
• For 2-piece tabletops: headrest and transition areas only partially suitable for X-rays due to hinges and grid
• Headrest adjustable in 13 locking steps up to +30°; headrest position left or right (if unspecified, delivered with headrest on right side)
• Two lifting columns: anodized light metal, smooth running, low-voltage electric drives controlled by a transformer and hand switch. Connection values per motor unit: 230V, 50/60Hz, 6.0A, 240W, IPX6, v = 16 mm/s, 2 x 1000 N

Technical data
AGA-POWER-LIFT
Article number: RGL-1065/EE / RGL-1080/EE
Frame: lacquered (standard colours available)
Length: 1,900 mm
Width: 650 mm / 800 mm
Height adjustment: 550 - 800 mm (electric motor)
Tabletop, 1 section: ✓ (for both widths)
Thickness of support plate: 15 mm (650 mm width) / 25 mm (800 mm width)
Radiolucent area: 1,300 x 600 mm (650 mm) / 1,300 x 750 mm (800 mm)
Tabletop, 2 sections (500 / 1,400 mm): RGL-1065/KEE / RGL-1080/KEE
Load capacity: 150 kg

Standard configuration

• Hand switch with spiral cable and two buttons (up/down)
• Transformer control and hand switch holder on the right side
• Base frame with levelling feet

Accessories & additional options (selection)
Article No. — Description
LR-75 / LR-125 — Set of castors Ø 75 mm / Ø 125 mm. Four swivel castors (two lockable). For various table heights; specify total table height when ordering.
LR/Z-125 — Central locking castor system, double swivel castors Ø 125 mm, linked with rods and diagonal foot pedals (green = ready to move, red = locked). For specified table height ranges. Retrofitting not possible.
OPS-40/A, OPS-60/A, OPS-100/A, OPS-140/A, OPS-170/A — Pair of standard rails (approx. 400 / 600 / 1,000 / 1,400 / 1,700 mm). Made of CrNi steel for mounting on the upholstery frame; for holding accessories and lower body radiation protection curtains. Retrofitting not possible.
PAL-190-65 / PAL-190-80 — Upholstered pad for 650 mm / 800 mm wide X-ray tables. Thickness 40 mm; fixed underneath the tabletop frame with straps and Velcro. Available in multiple upholstery colours.

Product variants and examples shown

• Variants demonstrate different castor sets, push handles, side guards, longitudinal braces, and upholstery options (different colours and widths)
• Examples: RGL-1065/EE with PAL-190-65 and LR/Z-125; RGL-1080/KEE with PAL-190-80 and various accessories

Technical characteristics / specifications

• Model name: AGA-POWER-LIFT
• Length: 1,900 mm
• Widths available: 650 mm / 800 mm
• Height adjustment (electric): approx. 550 – 800 mm
• Tabletop options: 1-section (continuous) or 2-section (500 / 1,400 mm) with headrest grid (13 steps)
• Support plate material: regenerated PE-1000, radiolucent
• Support plate thickness: 15 mm (650 mm) / 25 mm (800 mm)
• Radiolucent area: 1,300 x 600 mm (650 mm) / 1,300 x 750 mm (800 mm)
• Load capacity: 150 kg
• Drive: 2 lifting columns with low-voltage electric motors; per motor: 230 V, 50/60 Hz, 6.0 A, 240 W, IPX6, speed 16 mm/s, 1,000 N each
• Standard equipment: hand switch with spiral cable, transformer control, hand switch holder (right), base frame with levelling feet