A1067S PRESSURE BLASTER
MICROBLASTING SYSTEM WITHOUT WORKING CHAMBER
PRESSURE BLASTER is a self-operating microblasting system which can be used as an additional unit in dental labs or combined to a protection box for any finishing procedures in dental clinics.
High efficiency pressure technology assuring excellent performance at low pressure for consistent results.
The PRESSURE BLASTER should be used in conjunction to a separate working chamber.
Available nozzles: 0.8mm for grains from 75 to 95µm; 1.2mm from 95 to 110µm; 0.5mm for 50µm; 2.0mm for 250µm
Overall dimensions: 160x210x290mm
Working pressure: 1.5 – 5.0 BAR
DESCRIPTION OF THE MACHINE
PRESSURE BLASTER microblasting unit has been developed to carry out finishing
operations on prosthesis in the dental field, or on small pieces used in the mechanic and
The blasting result will depend on the correct use of the microabrasives:
• Aluminium oxide has to be used for surface roughening and mechanic pickling
operations which will increase bonding between ceramic, resin or composite on metal
support bridges (dental);
• The use of glass microbeads for satin-finishing operations will allow to attain an
excellent aesthetic effect which is a difficult procedure to be carried out manually;
• Cutting abrasives shall be used when removing investment at varying depth, according
to the pressure used, on any type of surface.