air-water vacuum pump separator / dental / with amalgam separator
CAS 1

Add to MyMedicalExpo favorites
Compare this product
air-water vacuum pump separator / dental / with amalgam separator air-water vacuum pump separator / dental / with amalgam separator - CAS 1
{{requestButtons}}

Characteristics

  • Options:

    air-water

  • Other characteristics:

    dental, with amalgam separator

Description

CAS 1 Combi-Separator
The CAS 1 combines separation and amalgam separation. It fits into a wide range of units and is installed ex works by many leading manufacturers. The two-stage system achieves a far higher separation capacity than conventional technology.
Technical dataCAS 1
Voltage (V)24
Frequency (Hz)50/60
Current consumption (A)4.0
Power (kW)0.10
Max. fluid flow rate (l/min)4
Separation rate97.9 %
Dimensions (H x W x D cm)25.5 x 15.1 x 11
43.5 x 25.5 x 16 (with housing)
Weight (kg)2.7, with housing 8.7
1 Intended purpose
The CAS 1 Combi-Separator is designed for
continuous separation of liquids and air and for
separation of amalgam from the entire waste
water from dental treatment units.
2.2 Intended use
Installation in accordance with the requirements
of the water authorities in the German Federal
States or in accordance with local regulations.
In accordance with the installation regulations of
DIBT Berlin.
The CAS 1 Combi-Separator is designed for the
separation of liquids and air as well as for the
separation of amalgam from the waste water
from a single treatment unit in a dry system.
Installation in dental treatment units and in practice rooms (housing version). Positioned in the
suction line after the spittoon and manifold.
The minimum volume of waste water that can
be supplied to the unit is 0.1 l/min, but must not
exceed 4.0 l/min. Here, a separation efficiency
of at least 95% is maintained with amalgam.