Volume of First chamber (m3)4.4
Loading (kg)to 1500
The volume of afterburner gas (m3)1.02
Burning rate (kg/h)up to 150
Dimensions (LхWхH)8.5х2.4х2.1 m
Loading window (LхWхH)350х200х40 cm
Type of fuel diesel / gas / fuel oil / waste oil
The VOLKAN 1500 incinerator case is made of high carbon steel with a thickness of at least 6-8 mm., As well as steel elements, the thickness and alloy of which depends on the model configuration. The VOLKAN 1500 incinerator case does not bear thermal loads due to the use of insulation materials in a concrete lining arrangement. The metal structure of the incinerator housing is essentially a lining frame, so the thickness of the metal is not so important here as the construction of the metal structure itself and the lining technology. The combustion chamber is the lining is the working surface in contact with the burning waste. The heat-resistant layer of the paint-and-lacquer coating of the case ensures the durability of the installation under the conditions of operation outside buildings and structures.
The combustion chamber of the VOLKAN 1500 incinerator with a vertical load is made of a powerful monolithic lining of refractory concrete, concrete mixes were developed by Eco-Spectrum and meet all the requirements for working at high temperatures. Fireproof concrete is resistant to high thermal and mechanical loads at the same time. For VOLKAN series furnaces, concretes with a working range from 1000 ° C to 1600 ° C are used.
Concrete is not only a refractory material, but also highly conductive heat,