Volume of First chamber (m3)3.76
Loading (kg)to 2000
The volume of afterburner gas (m3)1.4
Burning rate (kg/h)up to 150
Dimensions (LхWхH)4.2х4.4х3.6 m
Loading window (LхWхH)160х180х20 cm
Type of fuel diesel / gas / fuel oil / waste oil
The VOLKAN 2000 incinerator Form is made of high carbon steel with a thickness of at least 6-8 mm., As well as steel elements, the thickness and alloy of which depends on the model configuration. The VOLKAN 2000 incinerator case does not bear thermal loads due to the use of insulating materials in a concrete lining arrangement. The combustion chamber is the lining is the working surface in contact with the burning waste. The heat-resistant layer of the paint-and-lacquer coating of the case ensures the durability of the installation under the conditions of operation outside buildings and structures.
The combustion chamber of the VOLKAN 2000 incinerator with a vertical load is made of a powerful monolithic lining of refractory concrete, concrete mixes were developed by Eco-Spectrum and meet all the requirements for working at high temperatures. Fireproof concrete is resistant to high thermal and mechanical loads at the same time. For VOLKAN series furnaces, concretes with a working range from 1000 ° C to 1600 ° C are used.
Concrete is not only a refractory material, but also highly conductive heat, so in the technologies for the production of linings we use an insulating material that is ideally combined in combination with concrete.
Monolithic concrete pouring, in contrast to a brick incinerator, has several advantages: