Modular shelving unit FF MED

open-structurestainless steel

Shelving systems Order information: The FF MED shelving systems are available in various heights, widths, and depths. All shelves are add-on shelves that can be expanded as required. In addition, you can expand and combine shelves of various heights or attach a narrow shelf to a wide one. Angled installation is also possible. The shelf uprights are equipped with crossbars on the rear, which are joined using screws. A single assembled base shelf consists of: 2 shelf uprights and 1 crossbar A base shelf with add-on shelf consists of: 3 shelf uprights and 1 crossbar A shelf with 3 shelf sections consists of: 4 shelf uprights and 1 crossbar Due to the screwed crossbars, the shelf uprights are perfectly stable. Therefore mounting a crossbar behind every third shelf is sufficient. 2 crossbars are required for 4 to 6 shelves. The number of crossbars is incremented according to the number of shelf uprights. Add-on shelves are smaller than the base shelf. All that is required is an additional shelf upright. The add-on system creates size deviations from the dimensions of the base shelf. The size deviations of the FF MED shelves are shown in the illustration. For evenly distributed loads, the shelf capacity is as follows: Metal grate shelves: 600–1000 mm wide 150 kg 1200–1500 mm wide 100 kg Solid shelves: 600–1200 mm wide 150 kg 1400–1500 mm wide 125 kg The max. shelf load is 1200 kg. Technical changes reserved. For further details please refer to the catalog.