Treatment trolleys

ISO Trolley with 2 x drawers for modules of max. 50 mm height, 1 x drawer for modules of max. 100 mm height and 1 x drawer for modules of max. 200 mm height Modules not included Image also shows opt. accessories: ...

medi-net 233.6060.0 width 580 mm, height 750 mm, rectangular steel tube frame, collapsible, powder coated grey white RAL 9002, white aluminium RAL 9006 or grey aluminium RAL 9007, drawer with pre-assembled black galvanized ball bearing ...

... Dispensing and disposal module dimensions: 625 x 995 x 530 mm (W x H x D) with moulded top made of ABS, silver-grey colour, with treatment set accommodating instruments, medicines, disposables etc., 1 drawer Type 6 B, ...

Among the most popular Malvestio products, the Lincar trolley was developed for maximum stability under all conditions of use and excellent manoeuvrability even when fully loaded. A light and sturdy merging of plastic ...

Among the most popular Malvestio products, the Lincar trolley was developed for maximum stability under all conditions of use and excellent manoeuvrability even when fully loaded. A light and sturdy merging of plastic ...

Among the most popular Malvestio products, the Lincar trolley was developed for maximum stability under all conditions of use and excellent manoeuvrability even when fully loaded. A light and sturdy merging of plastic ...

... + White Variety of drawers configuration: European standard American Standard | for medicines | For all-in-one integrated cart A wide range of accessories: Defibrillator arm, Cardiac board, Side basket, Wastebasket, ...

... pegasusmedical.net Make medication management a breeze with our specialized medicine distribution cart, designed specifically for elderly care facilities Our Medicine Cassette and AIO system streamline the distribution ...

... lighter than most medical carts, our lightweight carts perfectly blend cost-efficiency, ergonomic design, and strength—enhancing clinical workflows, boosting staff satisfaction and health, and improving patient care ...

... diameter twin castors. Available in two cart modules: Eurofutura 60, work top width 60 cm and Eurofutura 90, work top width 90 cm. A choice of doors or drawer compositions with various colour combinations. Medication ...

Plaster Cart (fully equipped) ► Equipped as standard with: • 5 drawers ISO 600x400 including 1 x 1 level (H. 75 mm), 3 x 2 levels (H. 150 mm), 1 x 3 levels (H. 225 mm) • Bridge equipped with jersey rolls holder • ...

... key lock • 5 drawers ISO 600x400 including 3 x 1 level (H. 75 mm), 2 x 2 levels (H. 150 mm), 1 x 3 levels (H. 225 mm) • Trolley identification label with service name • Capacity: 9 modules ► Technical description ...

... Equipped as standard with : • Central locking with code + key lock • 6 ISO 600 X 400 X 100 BASKET IN GREY ABS • TREATMENT : Sticker "TREATMENT" ► Technical description : • Modular conception ...

TECHNICAL CHARACTERISTICS - PLASTER TROLLEY - Stainless steel structure - Retractable upper shelf - Two basins with 8 liters capacity ø360mm - One lower cabinet with three doors - Pushing lateral handle - ø100mm ...

Standard level, single column easy clean procedure trolleys Quick & easy disassembly, assists thorough & deep cleaning Recycled polypropylene one-piece top & side panels, smooth surfaces & radiused edges assists cleaning ...

Popular resuscitation trolley Drawer contents are secured when the lower cupboard is closed (security seal compatible) Upper drawer supplied with a plastic drawer liner, with dividers Recessed liquid retaining stainless ...

Trolleys designed for use when preparing & administering intravenous infusions Quick & easy disassembly, assists thorough & deep cleaning Fully welded mild steel frame Recyclable polypropylene one-piece top & side ...

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with lockable functional drawers with key lock system Oxygen cylinder holder Rotatable defibrillator shelf Height adjustable ...

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with functional drawers with key lock system Separators for drawers Waste bin Lockable sharps container Glove box ...

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with functional drawers with key lock system Lockable sharps container Waste bin Glove box holder Height adjustable ...

Dressing trolley is used for storing and transfer of all treatment equipment that may be needed during emergency interventions in emergency services and intensive care units.The product is made of ABS ...

Main body and dustbin made of 304 quality stainless steel, compact laminate drawers. Efficient use with 2 drawers and a single row of five transparent medicine boxes. SPECIFICATIONS Drawer material Compact laminate Dimensions 910x645x1010 ...

Emergency Trolley is produced considering the needs of the users in the emergency and intensive care areas, you can functionally position all the treatment equipment that may be needed during emergency ...

New design with innovative advantages and new characteristics designed to make the work of the healthcare staff as easy as possible. Lightweigther and maoeuvrable More resistant Versatil Easier to clean Best quality price ratio New ...

New design with innovative advantages and new characteristics designed to make the work of the healthcare staff as easy as possible. Lightweigther and maoeuvrable More resistant Versatil Easier to clean Best quality price ratio New ...

New design with innovative advantages and new characteristics designed to make the work of the healthcare staff as easy as possible. Lightweigther and maoeuvrable More resistant Versatil Easier to clean Best quality price ratio New ...

... the perfect solution if your institution implements bedside scanning. This medication cart can be fitted with modules 300 x 400 mm. To equip your medication cart with IT you need the following components. Belintra ...

... the medication cart has 13 positions (13P). This results in a standard height of the worktop of approximately 105 cm, which is ergonomically recommended. The smaller dimensions of the Medicart Drawers Small make this ...

In the context of medication security, the ability to lock medication carts is becoming increasingly important, as well as controlled access to medication. Access to the EPR (Electronic Patient Record) is also becoming ...

The elevator is practical and easy to handle thank to its manual traction and electric lifting. It allows to lift loads with a maximum weight of 150Kg up to a height of 1560mm. The 24Volt-12Ah battery does not require technical assistance; ...

Trolley useful for a wide range of medical procedures with 5 drawers in one single row, available in several heights and configurable according to Department needs. Usually equipped with waste bin and pull-up worktop ...

... emergency trolley is projected for: Resuscitation roms First aid departments Emergency response corners Hospital units/wards Residential care facilities Nursing homes Field hospitals The characteristics ...

Procedure trolley with 5 full-length drawers of different heights, customizable according to the needs of the ward and equipped with the most common accessories for the treatment: lateral pull-up worktop.

... brake wheel diameter 125 mm tread: thermoplastic rubber, gray non-marking ball bearing caster housing: polyamide - Cart dimensions: approx. 585 x 579 mm (W x D) working height: approx. 1114 mm left ...

... equipment options and colors. This gives you the freedom to configure your car as you wish. Depending on your needs, the trolleys can be equipped with the necessary accessories. Our product advisors in the office and ...

Closed hook trolley for dust-protected transport and storage of suture material trays, glove dispensers and other items suitable for being attached to hook racks. With 3-sided panelling and hinged doors 4 pairs ...

SKR-ET850 ABS HOSPITAL MEDICINE NURSING TROLLEY CASE ABS Trolley * Professional service * CE,FDA,ISO * Good quality with competitive price PRODUCT INTRODUCTION SKR-ET850 ABS Hospital ...

Technical parameters ▪ Overall Dimensions 790W X 610D X 1000H mm ▪ Defibrillator Stand 380×340mm ▪ Work Board 340×250mm ▪ Cpr Board 475 × 595 × 8.5mm ▪ Packing Size 820X650x1150 mm ▪ Product Weight 65 Kg ▪ Caster 5"Two Casters ...

Technical parameters ▪ Overall Dimensions 820W X 640D X 1080H mm ▪ Caster 5"Two Casters With Brake, Two Without Brake ▪ Work Board 340*250mm ▪ Packing Size 820X650x1150 mm ▪ Product weight 65 Kg Technical configuration ☑ Drawer ...

space-saving cart for suction pumps and collection systems for secretion CARRIER completely welded from polished stainless steel tube 2 standard size rails for mounting accessories handle bar ROLLING BASE welded ...

Body in AlMg3 light alloy sheet, anodized (10 micron). Self-levelling platform with 2 side die-cast elements, complete with nylon rolls fit for sliding in light alloy rails, and 1 or 2 steel springs. Strong non-twisting bottom iron frame ...

Body in AlMg3 light alloy sheet, anodized (10 micron). Self-levelling platform with 2 side die-cast elements, complete with nylon rolls fit for sliding in light alloy rails, and 1 steel spring. Push handle. Electronic scale integrated ...

Body in AlMg3 light alloy sheet, anodized (10 micron). Self-levelling platform with 2 side die-cast elements, complete with nylon rolls fit for sliding in light alloy rails, and 1 steel spring. Weight indicator. Strong non-twisting bottom ...

Two detachable pressed trays with dimensions 600 x 400 x 60 mm. With rounded corners and polished non-sharp edges. Handle for easy movement. Four ø80 mm castors with bumpers, two with brakes. Structure made of stainless steel, quality ...

Two shelves with tray shape with dimensions 680 x 420 mm. Rounded corners with no sharp edges. One drawer useful area of the drawer: 600 x 400 x 100 mm Handle for easy movement. Structure made of stainless steel, quality 18/10. ø80 ...

Two shelves with tray shape with dimensions 680 x 420 mm. Rounded corners with no sharp edges. Two drawers useful area of the drawer: 270 x 400 x 100 mm Handle for easy movement. ø80 mm castors with bumpers, two of them with brake. Structure ...

... . Service without handling: no need to separate the hot/cold elements, the trolley has a hot and a cold compartment, the tray slides between the 2 compartments of the trolley. TECHNOLOGY On-board ...

mobile application for 5 and 10 L oxygen bottles Safety The base legs are sealed with plastic plugs (no risk of injury) Hook bar:Height adjustable rack with two hooks, rubber covered Stand- and pushing tube:Extended ...

... mounting of devices being carried for an efficient patient transfer within the clinic guarantees the constant, medical patient care in case of emergency or patient transfer the compact design enables the entrainment ...

Especially light-weight and yet rugged, torsion-resistant steel frame structure, grey-painted with smoothly running, integrated hydraulic unit for food-actuated vertical adjustment. The lift- and transport truck is equipped with 4 steerable ...

The Aurion Unibody System trolleys are designed following the original concept of “monocoque”: the trolley and
the drawers are moulded in a single piece of Baydur® Polyurethane, that assures peerless ...

The Aurion Unibody System trolleys are designed following the original concept of “monocoque”: the trolley and
the drawers are moulded in a single piece of Baydur® Polyurethane, that assures peerless ...

The Aurion Unibody System trolleys are designed following the original concept of “monocoque”: the trolley and
the drawers are moulded in a single piece of Baydur® Polyurethane, that assures peerless ...