• Products
  • Catalogs
  • News & Trends
  • Exhibitions

resin dental material / composite / for dental veneers / for dental inlays
Opallis LAB

Add to MyMedicalExpo favorites
Compare this product Don’t compare this product
resin dental material / composite / for dental veneers / for dental inlays resin dental material / composite / for dental veneers / for dental inlays - Opallis LAB
{{requestButtons}}

Characteristics

  • Type:

    resin, composite

  • Applications:

    for dental veneers, for dental inlays, for dental laboratories, for dental crowns, for dental bridges

  • Other characteristics:

    photopolymerizable, translucent, opaque

Description

Opallis LAB
Resin composite for indirect use.
• High resistance and esthetics
• Longer working time
Advantages

High mechanical and wear resistance: Greater longevity of restoraion.
Excellent consistency: Easy handling and application.
Easy polishing: Highly esthetic restorations.
Longer working time: The formulation exclusive to a laboratory resin allows a longer working time to sculpt the restorations.
Shade and opaque diversity: The system has shades for enamel, dentin and translucent. Also, 3 opaque shades for masking of darkened substrates and metals.
Versatility: It can be used in association with Brava Block for characterization.
Indications
Indicated for preparation of indirect restorations.
• Single-unit total crowns (applied to a metal infrastructure or not)
• Bridges (applied to a metal infrastructure)
• Inlays
• Onlays
• Veneers
After proper machining of the metal structure, with the due mechanical retentions, apply a sandblast, aluminum oxide or glass spheres, and then wash and dry well.
To improve adherence of Opaque Composite on the metal, we recommend: apply a thin layer of Ambar Universal APS (FGM) with a fine brush or Cavibrush (FGM) and spread well; then, apply another layer and photoactivate for 30 seconds.
Apply a thin layer of Opaque Composite over the treated metal structure, from 3 to 5 minutes, in a light curing oven. Repeat this operation until the desired coverage.Increment with Opallis LAB, progressing (observing the thickness of 1.5mm per layer) and add to the light curing oven for 1 minute at each increment.The final light curing time will be 2 to 3 minutes.