SELL YOUR PRODUCTS
*mymedicalexpo  
English

Mortuary stretcher refrigerated mortuary cabinet
for coffinsmultiple-bodyfront-loading

mortuary stretcher refrigerated mortuary cabinet
mortuary stretcher refrigerated mortuary cabinet
mortuary stretcher refrigerated mortuary cabinet
mortuary stretcher refrigerated mortuary cabinet
mortuary stretcher refrigerated mortuary cabinet
Add to favorites
Compare this product
 

Characteristics

Applications
for mortuary stretchers, for coffins
Number of bodies
multiple-body
Loading
front-loading

Description

Body/coffin cold chambers in a cellular design with large or small lockable doors, for accommodating the deceased. Design: Self-supporting, stable construction of at least 8 parts, easy to disassemble, consisting of floor, wall and ceiling sandwich-panel elements with self-centring groove and spring sealing system. The interior and exterior cladding of the wall and ceiling elements are made of steel sheeting with a zinc/aluminium coating, with white RAL 9002 synthetic paint and protective film. The floor elements below have galvanized sheet steel cladding with a polyester powder coating, the top of the (design or specifications subject to change without notice) floor elements in the variant with large doors is in slip- embossed chrome/nickel steel trim (AISI 304) and a floor construction that can take wheel loads of up to 30,000 N/m². For the small door version, the upper side of the floor elements is chrome/nickel steel (AISI 304) with a ground surface. All wall and ceiling elements contain no wood at all. The edges have foam to protect against corrosion, the door frame elements fit flush against the wall elements, the end elements are chamfered on the front and/or long sides and have a homogenous foam layer; the connections between the elements - including the connections for partitions and screens and so forth - also use a groove and spring system. Thermal insulation of the elements is provided by hardened polyurethane foam with an environmentally friendly propellant, CFC-free according to the Halogenated Agents Decree, with a foam density of approx. 45 kg/m³. To obtain optimum K values, the wall thickness (insulation) is 80 mm (for normal cooling at +2 °C to +4 °C).

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.