Resting electrocardiograph M-TRACE

3-channel4-channelcomputer-based

M-TRACE MOBILE is a modern ECG register purposed for the private use by a patient at their home.

Simple handling of the device allows a patient to conduct the ECG test of similar quality as the one conducted by the clinical devices. Each M-TRACE MOBILE is remotely configured and controlled by a doctor and it can be updated from the central level. It also allows a doctor to remotely set up signal registration parameters and testing modes.

 M-TRACE MOBILE testing modes:

 Event holter
 Single test
 By the visual and audio indicators, M-TRACE MOBILE communicates incorrect contact between patient’s skin and electrodes.
 GSM/GPRS module of the class 12, that works in the GSM 850/900/1800/1900 MHz quad band
 Voice communication
 Automatic deletion of the test result after a receipt of confirmation that it was collected and registered by the System.
 Remote configuration of parameters of the device: sampling frequency, activated filters, registration time
 Test result sent to the System in the ECG-SCP format accordingly with the EN1064 norm
 Communication with the System directly by the http or https protocol
 Possibility of remote firmware software updates
 Time of test record up to 60 seconds, remote set-up
 Battery: LI-jon 1100mAh
 Frequency range: min. 0,05 – 100 Hz.
 CMRR: >100 dB ( with a 4 leads cabel)
 Input impedance > 10M
 Range of steering > 12mVpp 
A/C, 24 bit converter
 Signal resolution – 0,5uV/bit
 Sampling frequency: 1000Hz, programmed from the System
 Digital filtration: 50Hz, 35Hz, 25Hz, isoline filter
 In case of lack of network: 40MB of testing memory