Electric bed, 4-section, 3 of which jointed and 1 fixed centrally. Mattress platform made of polypropylene (PP), easy to be removed and cleaned, with round edges and integrated mattress stoppers. During adjustment, the roto-translating (auto-regression) backrest automatically shift backwards thus increasing the space on the pelvic area by creating an extra space of 13cm. This allows to reduce the pressure on the pelvis and sacral areas (thus reduction of pressure ulcers), to enhance breathing and to avoid continuous repositioning of the patient on the bed. The footrest area is manually adjustable by toothed rack and features a mechanical safety control to avoid incorrect angles/counter rotations of the knee. At the foot end, the mattress platform features as a standard an integrated extractable bed lengthener, which can be manually adjusted very easily, in two
positions, for a total length of 300 mm. In case of emergency, the backrest can be brought down manually through a (CPR) quick release lever available on both sides of the bed; the lever can be easily located irrespective of the position of the bed, even at lowest height and both with safety sides on or off. The bed intermediate frame supporting the mattress platform hosts folding-down 4 section safety sides, in polypropylene, with integrated electric controls. The design of the sections guarantees a containment height of 41 cm above the mattress platform and a total lateral containment surface for the patient, in compliance with the norms CEI EN 60601-2-52.