Body-worn processor bone conduction implant SAMBA

It's bright, it's stylish and it brings sound and joy to your life—SAMBA is the ideal audio processor for your VIBRANT SOUNDBRIDGE or BONEBRIDGE. Hold SAMBA between your fingers. First open one side of the battery compartment, then open the other side. Open the battery compartment until the battery is completely visible. Turn SAMBA upside-down carefully, allowing the battery to drop out. Take a new battery and remove the foil. Place the battery in the audio processor’s battery compartment. Slide the battery compartment into the audio processor. Battery Options Use only type 675 batteries to power your SAMBA. When you use SAMBA with the WaterWear accessory, however, you must substitute zinc-air batteries with one of the other types. Changing the cover Remove the battery. Place SAMBA on an even surface (e.g. table) and put one finger on top 1. First, lift one side of the cover 2, then lift the other side 3. Remove the cover completely and place the new cover on SAMBA. Press it down, firstly on the rear side 4, then on the front side 5. Insert the battery. Press the sides just below the cover and behind the opened battery compartment together 6 to ensure that the cover is in the correct position. Close the battery compartment. Using the hair clip You can use one of the attachment clips to prevent an accidental loss of SAMBA. Remove the battery and the cover of your audio processor. Pass the attachment eyelet under the battery compartment.