O2 pressure regulator MG-YBDT

airCO2N2O

It ensures that the pressure of the medical gases needed in hospital installations is brought to the ideal values and the installation is fed. In general, it acts as a backup of the fully automatic oxygen plant. It is connected to the installation of the relevant gas with bypass in parallel with the fully automatic high pressure converter. It ensures the continuity of the supply of the installation in case of failure or servicemaintenance of the fully automatic high pressure reducer. It can also be used individually in places that do not require intensive gas utilisation. Features Input Filter Thanks to the newly designed filter system, the diameter narrowing in the gas inlets is prevented and the possible particles that may enter the power plant from the gas sources are retained, thus extending the life of the power plant. *There is a small filter inside, since the filter clogs quickly, a large size filter is recommended. Alarm Unit It is a system that warns the technical personnel visually and audibly in case the pressure from the unit to the line falls below the ideal values and ensures that the alarm unit is switched off when the use is not required. When the line value is at the ideal value, the green light lights up, when it is below the ideal value, the red light lights up and gives an audible warning. This warning means that the cylinders are over. The only way to reset the alarm is to bring the pressure to ideal values. That is to renew the cylinders. High Flow Rate In cases where the hospital must operate above its capacity (natural disasters, pandemics, etc.), the product meets the needs of the hospital in a long-term and safe manner at maximum limits.