Point-of-care computer cart T 7

with drawerheight-adjustablesecure

Overview
Norav stress ECG carts bring the PC, monitors, ECG acquisition unit and accessories together on one mobile workstation. Every cart is built around the stress test workflow: monitor mounts, drawers for electrodes and consumables, and a central power switch for the whole station. Norav carts suit hospitals, clinics and private medical offices.

T6 Cart
A dual-monitor workstation on a single steel column, with every cable routed out of sight. Clean, stable, ready for a full stress lab. The T6 carries the PC, two flat-screen monitors and all stress test accessories on one enclosed steel column. Cabling runs inside the column, so the cart stays tidy and easy to move between rooms.

• Dual-monitor arm with articulated VESA mounts
• Enclosed steel column with internal cable routing
• Integrated main power switch on the column
• Top drawer with padded front edge
• Fold-out side tray for keyboard or mouse
• Middle shelf with raised rear lip
• Bottom drawer for electrodes and consumables
• Rear service panel with ventilation
• Curved steel base with four twin-wheel castors

T7 Cart
A modular workstation that adapts to the room, the equipment and the operator. Every surface at the height your setup needs. The T7 is built on a flexible column. Work surfaces, the drawer and the monitor pole attach along it and are set at the height each stress lab requires. A high four-leg base and 100 mm castors with locking brakes let you move it easily and lock it in place beside the treadmill or ergometer.

• Flexible element attachment along the column
• Work surface with drawer at 113 cm
• Two work surfaces at 62 cm and 28 cm
• Mouse mat on the right-hand side
• Monitor pole with single monitor mount, dual-monitor configuration available on request (verify, see open items)
• VESA 75 x 75 and 100 x 100 mounting
• 6-socket power strip with central switch
• Optional isolating transformer to IEC 60601
• Four-leg high base frame with 100 mm twin-wheel castors and locking brakes
• Round handle for moving the cart

Key Features

• Built for the Stress Lab — dedicated workstation with room for PC, monitors, acquisition unit and consumables
• Monitor Ready — VESA monitor mounts to hold screens with the PC carried on the same cart
• Everything in Reach — monitor mounts, drawers, shelves and keyboard/mouse area keep the full stress test within the operator’s reach
• Solid Construction — steel frames on both models; T6 has steel base and column, T7 uses aluminum and steel
• Easy to Move — twin-wheel castors on both carts; T7 adds a round handle and locking brakes
• Power Under Control — central power switch on both carts; T7 adds a 6-socket power strip and optional IEC 60601 isolating transformer

Technical specifications

• T6 Cart — Cart dimensions: W 47 cm (18.5″) / D 62 cm (24.4″) / H 179 cm (70.5″) without monitors; Material: steel; Monitors and PC not included
• T7 Cart — Cart dimensions: W 66 cm (26.0″) / D 68 cm (26.8″) / H 119 cm (46.9″) without monitor; Weight: 57 kg (126 lb); Material: aluminum and steel; Monitors and PC not included
• Monitor mounting — VESA 75 x 75 and 100 x 100 supported (T7; T6 uses dual-monitor articulated VESA mounts)
• Mobility — Twin-wheel castors on both carts; T7 uses 100 mm twin-wheel castors with locking brakes and four-leg high base
• Power — Integrated main power switch on column (both); T7: 6-socket power strip with central switch and optional IEC 60601 isolating transformer
• Cabling — T6: enclosed steel column with internal cable routing for tidy cable management
• Storage & workflow — Drawers and shelves sized for electrodes, consumables and keyboard/mouse; fold-out side tray for keyboard or mouse (T6)