Leg positioning cushion 151
supportwedge-shaped

leg positioning cushion
leg positioning cushion
leg positioning cushion
leg positioning cushion
leg positioning cushion
Add to favorites
Compare this product
 

Characteristics

Type
leg positioning, support
Other characteristics
wedge-shaped

Description

The James Leg Elevator – High is a leg support pillow, or leg support cushion to elevate the leg. It is 100% Heat Sealed for infection control. The Elevators have been in use in Orthopaedic wards for many years. They can help reduce or even prevent swelling in the leg. The Patient’s leg rests on a convoluted surface. The convolutions can help blood flow and help avoid deep vein thrombosis (DVT). You may also be interested in the James Leg Elevator – Low. To Use Place under the leg. The foot will be raised about 40cm / 16″ depending on the length of the patient’s leg. The Elevator has side walls to help prevent the leg from rolling off the sides. If the patient has a plaster cast, some sharp edges on the outside of the plaster cast may damage the cover of the Elevator, so we recommend placing a small towel on the Elevator under the cast to give some protection to the cover. Place a rolled-up towel under the knee if the patient’s leg needs to be bent or flexed.

Catalogs

No catalogs are available for this product.

See all of Pelican Manufacturing‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.